hwEntDspRedundancyT4
HUAWEI-ENT-VOICE-COMMON-MIB ·
.1.3.6.1.4.1.2011.5.25.253.5.20
Object
scalar
r/w
Integer32
Indicates the T4 redundancy parameter of T38 Fax. Default: 3
Context
- MIB
- HUAWEI-ENT-VOICE-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.5.25.253.5.20- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwEntDspAttributeTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntDspFaxMaxTrainRate Indicates the maximum fax training rate.
Options:
v17(1)
v29(2)
v27(3)
Default: v17(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.1 |
| hwEntDspBvqm Indicates the VQM switch.
Options:
enable(1)
disable(2)
Default: disable(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.10 |
| hwEntDspPlc Indicates the DSP packet loss compensation algorithm.
Options:
enable(1)
disable(2)
Default: disable(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.11 |
| hwEntDspMinAdaptJitterBuffer Minimum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Default: 2
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.12 |
| hwEntDspMaxAdaptJitterBuffer Maximum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Default: 135
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.13 |
| hwEntDspInitAdaptJitterBuffer Initial adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Default: 2
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.14 |
| hwEntDspMinFixedJitterBuffer Minimum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer.
Default: 2
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.15 |
| hwEntDspMaxFixedJitterBuffer Maximum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer.
Default: 135
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.16 |
| hwEntDspNormalFixedJitterBuffer Initial fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer.
Default: 60
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.17 |
| hwEntDspRedundancyPayload Indicates the payload type value of redundancy (it must not conflict with the payload used).
Default: 96 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.18 |
| hwEntDspRedundancyT30 Indicates the T30 redundancy parameter of T38 Fax.
Default: 3 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.19 |
| hwEntDspFaxTrainMode Indicates the fax training mode.
Options:
e2e(1)
local(2)
Default: e2e(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.2 |
| hwEntDspFaxV8Negotiate Indicates the switch of the V8 negotiation of FAX.
Options:
enable(1)
disable(2)
Default: disable(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.21 |
| hwEntDspRTCPXR The switch of RTCP XR.
Options:
enable(1) -enable RTCP XR
disable(2) -disable RTCP XR
Default: enable(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.22 |
| hwEntDspVbdPayload Indicates the payload type value of VBD (it must not conflict with the payload used).
Default: 102 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.23 |
| hwEntDspRfcNtePayload Indicates the payload type value of nte (it must not conflict with the payload used).
Default: 97 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.24 |
| hwEntDspG726R16kPayload Indicates the payload type value of G.726-16k (it must not conflict with the payload used).
Default: 103 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.25 |
| hwEntDspG726R24kPayload Indicates the payload type value of G.726-24k (it must not conflict with the payload used).
Default: 104 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.26 |
| hwEntDspG726R32kPayload Indicates the payload type value of G.726-32k (it must not conflict with the payload used).
Default: 101 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.27 |
| hwEntDspG726R40kPayload Indicates the payload type value of G.726-40k (it must not conflict with the payload used).
Default: 105 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.28 |
| hwEntDspAutoVBDSwitchMode VBD switch mode.
Options:
1. hostControl(1) -host control
2. autoSwitch(2) -auto switch
Default: hostControl(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.29 |
| hwEntDspCodeType Indicates the default coding type of DSP channel.
Options:
g711A(1)
g711u(2)
g723(3)
g729(4)
g726by16k(5)
g726by24k(6)
g726by32k(7)
g726by40k(8)
Default: g711A(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.3 |
| hwEntDspAlarmAdaptJitterBuffer Adapt jitterbuffer of DSP alarm threshold.
Default: 150
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.30 |
| hwEntDspRtcpPackageSendInterval Indicates the RTCP packet sending interval of DSP channel.
The valid value must be no less than 500, 0 indicates that the parameter is disabled.
Default: 5000
Unit: ms | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.4 |
| hwEntDspRtpPacketInterval Indicates the default RTP packet time of DSP channel.
Options:
1. pt5ms(1)
2. pt10ms(2)
3. pt20ms(3)
4. pt30ms(4)
Default: pt20ms(3) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.5 |
| hwEntDspEchoCheck Indicates whether to enable echo check of DSP channel.
Options:
enable(1)
disable(2)
Default: enable(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.6 |
| hwEntDspSilenceReduce Indicates whether to enable silence compression of DSP channel.
Options:
enable(1)
disable(2)
Default: disable(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.253.5.7 |
| hwEntDspClearmodePayload Indicates the default payload type of the DSP channel clearmode (it must not conflict with the payload used).
Default: 100 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.8 |
| hwEntDspSevereDegradethreshold Indicates the default threshold of severely packet loss seconds.
Default: 400 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.253.5.9 |