hwDocsIf3CmtsCmRemoteQueryTrap
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.2.1.0.3
Object
notification
CM remote query trap. This trap message is generated when querying the information about a remote CM.
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.2.1.0.3- Type
- notification
- Status
- current
- Parent
- hwdocsIfCmtsCommonTraps
- Siblings
- 34
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCmtsDownstreamChannelStatusChangeTrap CMTS downstream channel operation status change trap.
This trap message is generated when the operation status of downstream channel changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.1 |
| hwCmtsSNRRestoreAlarmTrap The SNR restore threshold trap.
This trap message is generated when the upstream SNR exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.10 |
| hwCmtsUpstreamAbnormalStateAlarmTrap The upstream abnormal state trap.
This trap message is generated when the upstream channel was disabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.11 |
| hwCmtsUpstreamNormalStateAlarmTrap The upstream normal state trap.
This trap message is generated when the upstream channel was re-enabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.12 |
| hwCmtsDownstreamAbnormalStateAlarmTrap The downstream abnormal state trap.
This trap message is generated when the downstream channel was disabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.13 |
| hwCmtsDownstreamNormalStateAlarmTrap The downstream normal state trap.
This trap message is generated when the downstream channel was re-enabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.14 |
| hwCmtsPortStatusChangeTrap RF port status change trap.
This trap message is generated when admin or operation status of the port changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.15 |
| hwCmtsAdmissionCtrlAlarmMinorFaultTrap The admission control minor threshold fault trap.
This trap message is generated when the channel bandwidth usage is higher than the minor alarm threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.16 |
| hwCmtsAdmissionCtrlAlarmMinorRestoreTrap The admission control minor threshold restore trap.
This trap message is generated when the channel bandwidth usage is lower than the minor alarm restore threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.17 |
| hwCmtsAdmissionCtrlAlarmMajorFaultTrap The admission control major threshold fault trap.
This trap message is generated when the channel bandwidth usage is higher than the major alarm threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.18 |
| hwCmtsAdmissionCtrlAlarmMajorRestoreTrap The admission control major threshold restore trap.
This trap message is generated when the channel bandwidth usage is lower than the major alarm restore threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.19 |
| hwCmtsUpstreamChannelStatusChangeTrap CMTS upstream channel operation status change trap.
This trap message is generated when the operation status of upstream channel changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.2 |
| hwCmtsUnstableConnCmExceedThresholdNormalTrap The number of unstable cable modem is lower than the threshold trap.
This trap message is generated when the number of unstable cable modem is lower than the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.20 |
| hwCmtsOfflineCmExceedThresholdNormalTrap The number of offline cable modem is lower than the threshold trap.
This trap message is generated when the number of offline cable modem is lower than the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.21 |
| hwCmtsCmAccessThresholdAlarmMinorFaultTrap The number of access cable modems has reached the maximum number allowed trap.
This trap message is generated when the number of access cable modems has reached the maximum number… | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.22 |
| hwCmtsCmAccessThresholdAlarmMajorRestoreTrap The number of access cable modems restore trap.
This trap message is generated when the number of access cable modems is lower than restore threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.23 |
| hwCmtsCmWhitelistMacTrap The CM was rejected for its MAC not in CM whitelist allowed trap.
This trap message is generated when the CM has been rejected for its MAC not in CM whitelist. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.24 |
| hwCmtsRfTxPowerAbnormalFaultTrap The RF transmit power is abnormal trap.
This trap message is generated when the intelligent RF adjustment failed. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.25 |
| hwCmtsRfTxPowerAbnormalRestoreTrap The RF transmit power is abnormal restore trap.
This trap message is generated when the intelligent RF adjustment. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.26 |
| hwCmtsRasterStatusCheckTrap The raster check status changed trap.
This trap message is generated when the raster status changed. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.27 |
| hwCmtsCmOnOfflineTrap The CM online/offline trap.
This trap message is generated when the CM goes online or offline. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.28 |
| hwCmtsCmAlarmCmFaultTrap The CM offline trap.
This trap message is generated when the CM goes offline. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.29 |
| hwCmtsCmAlarmCmRestoreTrap The CM offline recovery trap.
This trap message is generated when the CM goes online after being offline. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.30 |
| hwCmtsEqamChannelStatusChangeTrap CMTS Eqam channel operation status change trap.
This trap message is generated when the operation status of Eqam channel changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.31 |
| hwCmtsEqamAbnormalStateAlarmTrap The Eqam channel abnormal state trap.
This trap message is generated when the Eqam channel was disabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.32 |
| hwCmtsEqamNormalStateAlarmTrap The Eqam channel normal state trap.
This trap message is generated when the Eqam channel was re-enabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.33 |
| hwCmtsDocsisChannelUtilizationAlarmTrap The DOCSIS channel utilization exceeds threshhold trap.
This trap message is generated when the DOCSIS channel utilization exceeds the threshhold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.34 |
| hwCmtsUpstreamSpectrumGroupDynSwitchAlarmTrap The upstream parameters associated with spectrum group is switched trap.
This trap message is generated when the upstream modulation profile or upstream rx power is switched. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.35 |
| hwCmtsCmDataChangeTrap CM data change trap.
This trap message is generated when the CM data changed. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.4 |
| hwCmtsUnstableConnCmExceedThresholdAlarmTrap Unstable cable modem exceed the threshold trap.
This trap message is generated when unstable cable modem exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.5 |
| hwCmtsOfflineCmExceedThresholdAlarmTrap Offline cable modem exceed the threshold trap.
This trap message is generated when offline cable modem exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.6 |
| hwCmtsOverCmSpecAlarmTrap The number of connected CMs has reached the maximum specifications.
Number of connected CMs has reached the maximum specifications. When the number of connected CMs reaches the ma… | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.7 |
| hwCmtsEQAMChannelUtilizationAlarmTrap The EQAM Utilization Threshold trap.
This trap message is generated when the EQAM Utilization exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.8 |
| hwCmtsSNRDegradeAlarmTrap The SNR degrade threshold trap.
This trap message is generated when the upstream SNR below the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| DOCS-IF3-MIBdocsIf3CmtsCmRegStatusId This attribute uniquely identifies a CM. The CMTS
must assign a single id value for each CM MAC address seen
by the CMTS. The CMTS should ensure that the association
between an … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.3.1.1 |
| hwDocsIf3CmtsCmDsChannelIdList Indicates list of downstream channel indexes. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.1 |
| hwDocsIf3CmtsCmDsRxPowerList Indicates list of the receiver power of downstream channels. | scalar | 0.1 dBmV OctetString | .1.3.6.1.4.1.2011.6.180.3.2 |
| hwDocsIf3CmtsCmDsSnrList Indicates list of the SNR of downstream channels. | scalar | 0.1 dB OctetString | .1.3.6.1.4.1.2011.6.180.3.3 |
| hwDocsIf3CmtsCmUsChannlIdList The up channel list of CM. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.4 |
| hwDocsIf3CmtsCmUsTxPowerList The up channel power list of CM. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.5 |
| hwDocsIf3CmtsCmUsTxTimingOffsetList The send time offset list of CM. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.6 |
| hwDocsIf3CmtsCmSysDesc The system description of CM. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.7 |
| hwCmtsCmRegRemoteStatus The remote status of CM as indicated by the value of
docsIf3CmStatusValue. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.3.8 |
| hwDocsIf3CmtsCmRegStatusT1Timeouts The number of T1 timeouts.
T1 represents waiting for UCD.
-1 represents invalid value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.3.15 |
| hwDocsIf3CmtsCmRegStatusT2Timeouts The number of T2 timeouts.
T2 represents waiting for broadcast ranging.
-1 represents invalid value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.3.16 |
| hwDocsIf3CmtsCmUsStatusT3Timeouts List of the number of T3 timeouts of upstream channels.
T3 represents waiting for ranging response. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.17 |
| hwDocsIf3CmtsCmUsStatusT4Timeouts List of the number of T4 timeouts of upstream channels.
T4 represents waiting for unicast ranging opportunity. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.18 |
| hwDocsIf3CmtsCmIGMPVersion Indicates the version of the IGMP/MLD.
Options:
1. v1(1) - Version 1
2. v2(2) - Version 2
3. v3(3) - Version 3
4. invalidValue(-1) - Invalid value | scalar | Enumeration | .1.3.6.1.4.1.2011.6.180.3.19 |
| hwDocsIf3CmtsCmDsUncorrectedErrorCodeList List of the number of the codewords received with uncorrectable
errors from the CM on the downstream channels. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.27 |
| hwDocsIf3CmtsCmDsCorrectedErrorCodeList List of the number of the codewords received with correctable
errors from the CM on the downstream channels. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.28 |
| hwDocsIf3CmtsCmDsGoodCodeList List of the number of the codewords received without error
from the CM on the downstream channels. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.29 |
| hwDocsIf3CmMdCfgIpProvMode This attribute configures the CM IP provisioning mode override.
Options:
1. ipv4Only (0) - When this attribute is set to 'ipv4Only' the CM will acquire
… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.180.3.30 |
| hwDocsIf3CmtsCmDsMerList Indicates list of the modulation Error Ratio (MER) of downstream channels. | scalar | TenthdB OctetString | .1.3.6.1.4.1.2011.6.180.3.24 |
| hwDocsIf3CmtsCmDsMerSamplesList Indicates list of the modulation Error Ratio (MER) sample of CMTS,MER samples is a statistically significant number. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.25 |
| hwDocsIf3CmtsCmDsMicroreflectionsList Indicates list of the microreflections received on the downstream channels. | scalar | -dBc OctetString | .1.3.6.1.4.1.2011.6.180.3.26 |
| hwDocsIf3CmtsCmDsPer Indicates the rate of package error received on the downstream channels.
-1 represents invalid value. | scalar | 0.00001 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.3.31 |
| hwDocsIf3CmtsCmUsRangingStatusList Indicates the list of the CM upstream channel ranging state. | scalar | OctetString | .1.3.6.1.4.1.2011.6.180.3.35 |