hwCmtsCmAccessThresholdAlarmMinorFaultTrap
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.2.1.0.22
Object
notification
The number of access cable modems has reached the maximum number allowed trap. This trap message is generated when the number of access cable modems has reached the maximum number allowed.
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.2.1.0.22- Type
- notification
- Status
- current
- Parent
- hwdocsIfCmtsCommonTraps
- Siblings
- 34
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCmtsDownstreamChannelStatusChangeTrap CMTS downstream channel operation status change trap.
This trap message is generated when the operation status of downstream channel changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.1 |
| hwCmtsSNRRestoreAlarmTrap The SNR restore threshold trap.
This trap message is generated when the upstream SNR exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.10 |
| hwCmtsUpstreamAbnormalStateAlarmTrap The upstream abnormal state trap.
This trap message is generated when the upstream channel was disabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.11 |
| hwCmtsUpstreamNormalStateAlarmTrap The upstream normal state trap.
This trap message is generated when the upstream channel was re-enabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.12 |
| hwCmtsDownstreamAbnormalStateAlarmTrap The downstream abnormal state trap.
This trap message is generated when the downstream channel was disabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.13 |
| hwCmtsDownstreamNormalStateAlarmTrap The downstream normal state trap.
This trap message is generated when the downstream channel was re-enabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.14 |
| hwCmtsPortStatusChangeTrap RF port status change trap.
This trap message is generated when admin or operation status of the port changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.15 |
| hwCmtsAdmissionCtrlAlarmMinorFaultTrap The admission control minor threshold fault trap.
This trap message is generated when the channel bandwidth usage is higher than the minor alarm threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.16 |
| hwCmtsAdmissionCtrlAlarmMinorRestoreTrap The admission control minor threshold restore trap.
This trap message is generated when the channel bandwidth usage is lower than the minor alarm restore threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.17 |
| hwCmtsAdmissionCtrlAlarmMajorFaultTrap The admission control major threshold fault trap.
This trap message is generated when the channel bandwidth usage is higher than the major alarm threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.18 |
| hwCmtsAdmissionCtrlAlarmMajorRestoreTrap The admission control major threshold restore trap.
This trap message is generated when the channel bandwidth usage is lower than the major alarm restore threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.19 |
| hwCmtsUpstreamChannelStatusChangeTrap CMTS upstream channel operation status change trap.
This trap message is generated when the operation status of upstream channel changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.2 |
| hwCmtsUnstableConnCmExceedThresholdNormalTrap The number of unstable cable modem is lower than the threshold trap.
This trap message is generated when the number of unstable cable modem is lower than the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.20 |
| hwCmtsOfflineCmExceedThresholdNormalTrap The number of offline cable modem is lower than the threshold trap.
This trap message is generated when the number of offline cable modem is lower than the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.21 |
| hwCmtsCmAccessThresholdAlarmMajorRestoreTrap The number of access cable modems restore trap.
This trap message is generated when the number of access cable modems is lower than restore threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.23 |
| hwCmtsCmWhitelistMacTrap The CM was rejected for its MAC not in CM whitelist allowed trap.
This trap message is generated when the CM has been rejected for its MAC not in CM whitelist. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.24 |
| hwCmtsRfTxPowerAbnormalFaultTrap The RF transmit power is abnormal trap.
This trap message is generated when the intelligent RF adjustment failed. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.25 |
| hwCmtsRfTxPowerAbnormalRestoreTrap The RF transmit power is abnormal restore trap.
This trap message is generated when the intelligent RF adjustment. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.26 |
| hwCmtsRasterStatusCheckTrap The raster check status changed trap.
This trap message is generated when the raster status changed. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.27 |
| hwCmtsCmOnOfflineTrap The CM online/offline trap.
This trap message is generated when the CM goes online or offline. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.28 |
| hwCmtsCmAlarmCmFaultTrap The CM offline trap.
This trap message is generated when the CM goes offline. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.29 |
| hwDocsIf3CmtsCmRemoteQueryTrap CM remote query trap.
This trap message is generated when querying the information about a remote CM. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.3 |
| hwCmtsCmAlarmCmRestoreTrap The CM offline recovery trap.
This trap message is generated when the CM goes online after being offline. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.30 |
| hwCmtsEqamChannelStatusChangeTrap CMTS Eqam channel operation status change trap.
This trap message is generated when the operation status of Eqam channel changes. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.31 |
| hwCmtsEqamAbnormalStateAlarmTrap The Eqam channel abnormal state trap.
This trap message is generated when the Eqam channel was disabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.32 |
| hwCmtsEqamNormalStateAlarmTrap The Eqam channel normal state trap.
This trap message is generated when the Eqam channel was re-enabled. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.33 |
| hwCmtsDocsisChannelUtilizationAlarmTrap The DOCSIS channel utilization exceeds threshhold trap.
This trap message is generated when the DOCSIS channel utilization exceeds the threshhold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.34 |
| hwCmtsUpstreamSpectrumGroupDynSwitchAlarmTrap The upstream parameters associated with spectrum group is switched trap.
This trap message is generated when the upstream modulation profile or upstream rx power is switched. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.35 |
| hwCmtsCmDataChangeTrap CM data change trap.
This trap message is generated when the CM data changed. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.4 |
| hwCmtsUnstableConnCmExceedThresholdAlarmTrap Unstable cable modem exceed the threshold trap.
This trap message is generated when unstable cable modem exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.5 |
| hwCmtsOfflineCmExceedThresholdAlarmTrap Offline cable modem exceed the threshold trap.
This trap message is generated when offline cable modem exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.6 |
| hwCmtsOverCmSpecAlarmTrap The number of connected CMs has reached the maximum specifications.
Number of connected CMs has reached the maximum specifications. When the number of connected CMs reaches the ma… | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.7 |
| hwCmtsEQAMChannelUtilizationAlarmTrap The EQAM Utilization Threshold trap.
This trap message is generated when the EQAM Utilization exceed the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.8 |
| hwCmtsSNRDegradeAlarmTrap The SNR degrade threshold trap.
This trap message is generated when the upstream SNR below the threshold. | notification | - | .1.3.6.1.4.1.2011.6.180.2.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwFrameIndex The index of a shelf in the device. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.1.1.1 |
| HUAWEI-DEVICE-MIBhwSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex.
For the hwFrameIndex object, refe… | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.1 |
| HUAWEI-DEVICE-MIBhwPortIndex Port index, indicating the physical number of the port on a board. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.4.1.1 |
| hwDocsIf3CmtsCmAccessNumUpperThreshold The upper threshold of CMs that can be connected.
-1 represents invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.44.1.1 |
| hwDocsIf3CmtsCmAccessNumLowerThreshold The lower threshold of CMs that can be connected.
-1 represents invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.44.1.2 |
| hwDocsIf3CmtsCmAccessCurrentNum Indicates The number of access cable modems.
-1 represents invalid value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.3.36 |