hwExtClkOutputBitsType
HUAWEI-CLK-MIB ·
.1.3.6.1.4.1.2011.6.25.1.3.18
Object
scalar
r/w
Enumeration
Get or set output signal of GPIO board. Default to bitsType2Mbps(2). Options: 1. bitsType2MHz (1) - indicates that the output signal of the GPIO board is bitsType2MHz 2. bitsType2Mbps(2) - indicates that the output signal of the GPIO board is bitsType2Mbps 3. bitsType1544bps(3) - indicates that the output signal of the GPIO board is bitsType1.544Mbps 4. bitsType1ppsInput(4) - indicates that the input signal of the GPIO board is bitsType1ppsInput 5. bitsType1ppsOutput(5) - indicates that the output signal of the GPIO board is bitsType1ppsOutput
Context
- MIB
- HUAWEI-CLK-MIB
- OID
.1.3.6.1.4.1.2011.6.25.1.3.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwSystemClockManagePara
- Siblings
- 48
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bitsType2MHz |
2 | bitsType2Mbps |
3 | bitsType1544bps |
4 | bitsType1ppsInput |
5 | bitsType1ppsOutput |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwUASystemWorkMode UA work mode.
Options:
1.olt(1) - indicates that the UA system works as an OLT in VPRING
2.onu(2) - indicates that the UA system works as an ONU in VPRING | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.1 |
| hw1588ClkPEmode obsolete The 1588 clock PE-mode of device.
Options:
1. p2p(1) - indicates that the 1588 clock works in P2P mode
2. e2e(2) - indicates that the 1588 clock works at E2E mode
… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.10 |
| hw1588ClkID The 1588 clock identity of device.
The first 4 bytes must be 0x259e40 for an OLT.
The first 4 bytes must be 0x259e41 for a MxU. | scalar | OctetString | .1.3.6.1.4.1.2011.6.25.1.3.11 |
| hwExtClkoutputThresholdSsmQl Clock source quality level.
Options:
1. qlPRC(2) - primary reference clock
2. qlSsuA(4) - indicates that the clock signal comes from class I or class V
sub-cloc… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.12 |
| hwExtClkOutputMode The mode of external clock output.
Options:
1.fixTrace(1) -Output system clock
2.autoTrace(2) -indicates that external clock output automatically
3.noTrace(3) -indicates … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.13 |
| hwClkWaitRestoreTime If the clock state changes from failed to normal, wait
the specified time to join clock source selection.
Defined in G.781: wait restore time.
Unit:minute
Default value: 5 minutes… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.14 |
| hwClkHoldoffTime If the clock state changes from normal to failed, wait the specified time to mark the failed state.
Unit:second.
Default value: 0 second
Range: 0 - 1
0 - 0 second
1 - 1 second | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.15 |
| hwQlOutputUpperLimit System output clock signal with a lower quality than the limited value.
Options:
1.qlPRC(2) - indicates that the quality of the system output clock signal is lower than qlPRC
2.q… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.16 |
| hwPTPEnable Enable or disable the 1588 function.
Options:
1.enable(1) - Enable the 1588 function
2.disable(2) - Disable the 1588 function
Default: disable(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.17 |
| hwQlInputLowerLimit Clock source quality level:
Options:
1. qlPRC(2) - indicates that primary reference clock
2. qlSsuA(4) - indicates that the clock signal comes from class I or class
… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.19 |
| hw3rdClkSubBoardWorkMode Working mode of 3rd sub-board clock.
Options:
1. trace(1) - indicates that the clock is working in tracing mode
2. keep(2) - indicates that the clock is… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.2 |
| hwPtpDomain PTP domain value.
BC:
Range: 0-255
Default: 0
T-BC:
Range: 24-43
Default: 24 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.20 |
| hwPtpBMCEnable PTP BMC switch.
BC:
Options:
1. enable(1) - indicates that ptp BMC is enabled
2. disable(2) - indicates that ptp BMC is disabled
Default: disable(2)
… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.21 |
| hwPtpLockState PTP lock state.
Options:
1. locked(1) - indicates that the clock is locked
2. unlocked(2) - indicates that the clock is unlocked | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.22 |
| hwPtpFreqLockStatus PTP frequency lock state.
Options:
1. locked(1) - indicates that the frequency is locked
2. unlocked(2) - indicates that the frequency is unlocked | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.23 |
| hwPtpTimeScale The time scale of the grandmaster clock. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.24 |
| hwPtpFrequencyTraceable The value is true if the frequency determinning the timescale is traceable to a primary reference, otherwise the value is false. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.25.1.3.25 |
| hwPtpTimeTraceable The value is ture if the time is traceable to a primary reference. otherwise the value is false. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.25.1.3.26 |
| hwPtpGMClockID Grand master clock ID. | scalar | OctetString | .1.3.6.1.4.1.2011.6.25.1.3.27 |
| hwPtpGrandMasterClockPriority1 Grand master clock priority1. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.28 |
| hwPtpGrandMasterClockPriority2 Grand master clock priority2. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.29 |
| hwSystemClockMode System clock mode.
Options:
1. clockClksubboard(1) - indicates the clock-subboard supply output clock
2. clockLocalboard(2) - indicates the local-board supply output clock | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.3 |
| hwPtpGrandMasterClockAccuracy Grand master clock accuracy. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.30 |
| hwPtpGrandMasterClockClass Grand master clock class. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.25.1.3.31 |
| hwPtpGrandMasterClockTimeSource Indicates the source of time used by the grandmaster clock. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.32 |
| hwPtpPhyPhaseSubCur PTP physics phase current warp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.33 |
| hwPtpPhyPhaseSubMin PTP physics phase min warp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.34 |
| hwPtpPhyPhaseSubMax PTP physics phase max warp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.35 |
| hwPtpPhyPhaseSubMean PTP physics phase mean warp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.36 |
| hwPtpTimeSyncOffsetCur PTP current time offset. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.37 |
| hwPtpTimeSyncOffsetMin PTP min time offset. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.38 |
| hwPtpTimeSyncOffsetMax PTP max time offset. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.39 |
| hw3rdClkSubBoardInputStatus Clock-subboard clock input status.
Options:
1.none(1) - indicates that the clock-subboard has no clock-signal input
2.normal(2) - indicates that the cloc… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.4 |
| hwPtpTimeSyncOffsetMean PTP average time offset. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.40 |
| hwPtpTimeMeanpathdelayCur PTP current path delay. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.41 |
| hwPtpTimeMeanpathdelayMin PTP min path delay. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.42 |
| hwPtpTimeMeanpathdelayMax PTP max path delay. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.43 |
| hwPtpTimeMeanpathdelayMean PTP average path delay. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.44 |
| hwPtpDlyMeasureEnable PTP asymmetry measure switch.
Options:
1. enable(1) - indicates that ptp asymmetry measure is enabled
2. disable(2) - indicates that ptp asymmetry measure is disabled | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.45 |
| hwPtpParentClockID PTP parent clockID. | scalar | OctetString | .1.3.6.1.4.1.2011.6.25.1.3.46 |
| hwPtpParentPortNumber PTP parent portnumber. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.47 |
| hwExtClkOutputState External clock output state.
Options:
1. on(1) - indicates that the output of external clock is opened
2. off(2) - indicates that the output of external clock is closed | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.48 |
| hwPtpLocalSourceLocalPriority In T-BC mode, the local priority is configured to calculate the optimum master clock.
The smaller the value, the higher the priority.
Range: 1-255
Default: 128
T… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.49 |
| hw3rdClkSubBoardOutputStatus Clock-subboard clock output status.
Options:
1.normal(1) - indicates that the clock-subboard output status is normal
2.fault(2) - indicates thaclock-subbo… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.5 |
| hwPtpLocalSourcePriority2 In T-BC mode, the priority2 is configured to calculate the optimum master clock.
The smaller the value, the higher the priority.
This attribute is invalid in BC mode.
Range: 0-2… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.3.50 |
| hwClockSelectionMode Clock selection mode.
Options:
1.qlDisable(1) - indicates that a clock source is selected based on its priority
2.qlEnable(2) - indicates that a clock source is selected based on… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.6 |
| hwClkRevertiveMode Clock revertive mode.
Options:
1.revertive(1) - Though a clock source had fault record,
it still can be selected as the system clock
2.nonRevertive(2)- If one… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.8 |
| hw1588ClkType The 1588 clock type of device.
Options:
1. oc(1) - indicates that 1588 clock type is Ordinary Clock
2. bc(2) - indicates that 1588 clock type is Boundary Clock
3. … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.25.1.3.9 |