hwBfdTrapSendInterval

HUAWEI-BFD-MIB · .1.3.6.1.4.1.2011.5.25.38.1.14
MIB view Table view

Object

scalar r/w Integer32 
Define the sending interval of TRAP message.
Unit: second
Default: 120

Context

MIB
HUAWEI-BFD-MIB
OID
.1.3.6.1.4.1.2011.5.25.38.1.14
Type
scalar
Access
readwrite
Status
current
Parent
hwBfdScalarsObjects
Siblings
20

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwBfdVersionNumber
The current version number of the BFD protocol is 1. Default: 1
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.1
hwBfdSessDynamicPingInterval
Define the sending interval of the MPLS echo packet. Default: 60 Unit: second
scalarUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.10
hwBfdSessDynamicSupportPassive
The capability of automatically creating BFD sessions on the LSP egress. Options: 1. enabled(1) -denotes that the egress can create BFD sessions 2. disabled(2) -denotes that the …
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.38.1.11
hwBfdSessDelayUpTime
Define delay interval before the session turns to up. Unit: second Default: 0
scalarUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.12
hwBfdSessMultiDstPort
The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0. Default: 3784
scalarInteger32.1.3.6.1.4.1.2011.5.25.38.1.13
hwBfdLimitDeviceName
The device name which session number reached up limit.
scalarOctetString.1.3.6.1.4.1.2011.5.25.38.1.15
hwBfdDynamicSessionTos
The Tos-Exp of dynamic session. Default: 7
scalarUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.16
hwBfdStaticSessionTos
The Tos-Exp of static session. Default: 7
scalarUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.17
hwBfdDynamicSessionTosEx
The extended Tos-Exp of dynamic session. Default: 7
scalarUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.18
hwBfdSessCfgRemoteFailType
The virtual access AP notify process bfd session configuration failed. Options: 1. localDiscriminatorNonsupport(101) -indicates the local discriminator isnn't supported 2. loca…
scalarEnumeration.1.3.6.1.4.1.2011.5.25.38.1.19
hwBfdAdminStatus
Describe the administrative status of a BFD protocol. Options: 1. enabled(1) -denotes that the BFD Process is active on all interface 2. disabled(2) -denotes that the BFD proce…
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.38.1.2
hwBfdBitErrorDetectSessLimitNumber
Define the maximum number of BFD bit-error-detection sessions allowed in the logic router. Default: 0
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.20
hwBfdSessActNumber
Number of in-use BFD resources. Default: 0
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.21
hwBfdSessLimitNumber
Define the maximum number of BFD sessions allowed in the logic router. Default: 0
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.3
hwBfdSessInterfaceLimitNumber
Define the maximum number of BFD sessions allowed per board. Default: 0
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.4
hwBfdSessStaticNumber
The total number of BFD static sessions. Default: 0
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.5
hwBfdSessDynamicNumber
The total number of BFD dynamic sessions. Default: 0
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.6
hwBfdSessGlobalDefaultIpAddr
Define the default multicast IP address used in BFD multicast detection. Default: 224.0.0.184
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.38.1.7
hwBfdEchoPassiveStatus
The passive Echo function of BFD. Options: 1. enabled(1) -denotes that the BFD EchoPassive capability is enabled 2. disabled(2) -denotes that the BFD EchoPassive capability is di…
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.38.1.8
hwBfdEchoAclNum
The Acl Number for passive Echo function of BFD. Default: 0
scalarUnsigned32.1.3.6.1.4.1.2011.5.25.38.1.9