hwAclIpv6AdvancedTimeRangeIndex

HUAWEI-ACL-MIB · .1.3.6.1.4.1.2011.5.1.1.13.1.19
MIB view Table view

Object

column r/w Integer32 
The value of this object identifies the index of the time range during which an ACL6 rule can be applied. 
The value ranges from 0 to 256.
The value 0 indicates that no time range is specified for the rule.

Context

MIB
HUAWEI-ACL-MIB
OID
.1.3.6.1.4.1.2011.5.1.1.13.1.19
Type
column
Access
readwrite
Status
current
Parent
hwAclIpv6AdvancedRuleEntry
Table
hwAclIpv6AdvancedRuleTable
Siblings
38

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-256

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwAclIpv6AdvancedAclNum
The index of ipv6 advanced acl table, the index range is (3000..3999 | 42768..75535).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.1
hwAclIpv6AdvancedDestIp
The object indicates the destination IPv6-address of an ipv6 advanced acl rule.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.5.1.1.13.1.10
hwAclIpv6AdvancedDestPrefix
The value of this object identifies the mask length of the destination IPv6 address. The value ranges from 0 to 128.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.11
hwAclIpv6AdvancedDestOp
The object indicates the destination Port operation symbol of an ipv6 advanced acl group. It compares the port operators of destination address. 'lt' means less than, 'eq' means e…
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.13.1.12
hwAclIpv6AdvancedDestPort1
This object indicates the largest destination port number.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.13
hwAclIpv6AdvancedDestPort2
This object indicates the smallest destination port number.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.14
hwAclIpv6AdvancedPrecedence
The value of this object identifies the precedence sub-field. It is the higher three bits of the ToS field in an IPv6 header. The value ranges from 0 to 7. The invalid value is 25…
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.15
hwAclIpv6AdvancedTos
The value of this object identifies the ToS sub-field. This field covers four bits after the higher three bits of the ToS field in an IPv6 header. The value ranges from 0 to 15. T…
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.16
hwAclIpv6AdvancedDscp
The value of this object identifies the higher seven bits of the ToS field in an IPv6 header. The value ranges from 0 to 63. The invalid value is 255.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.17
hwAclIpv6AdvancedEstablish
The object indicates whether or not establishing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.13.1.18
hwAclIpv6AdvancedSubitem
The object specifies the number of an ipv6 advanced ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal t…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.1.1.13.1.2
hwAclIpv6AdvancedIcmpType
The value of this object identifies the ICMPv6 message type. The value ranges from 0 to 255. The value 65535 is invalid.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.20
hwAclIpv6AdvancedIcmpCode
The value of this object identifies the code of an ICMPv6 message. The value ranges from 0 to 255. The value 65535 is invalid.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.21
hwAclIpv6AdvancedFragment
The object indicates the type of the packet. 1: fragment, indicating that the packet is a fragment 255: none, invalid value This object cannot be modified once a rule is crea…
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.13.1.22
hwAclIpv6AdvancedLog
The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, s…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.13.1.23
hwAclIpv6AdvancedEnable
The object indicates whether the rule is valid or invalid.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.1.1.13.1.24
hwAclIpv6AdvancedCount
This object indicates the number of packets matched by a rule. A maximum of 64 bits are supported.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.1.1.13.1.25
hwAclIpv6AdvancedVrfName
This object indicates a VPN instance. The length of a VPN instance name cannot exceed 31 characters.
columnOctetString.1.3.6.1.4.1.2011.5.1.1.13.1.26
hwAclIpv6AdvancedRowStatus
RowStatus, Now support three state: CreateAndGo, Active, Destroy.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.1.1.13.1.27
hwAclIpv6AdvancedDescription
The object indicates the description of this IPv6 advanced rule. The object describes the usage of an IPv6 ACL with a word or a sentence.
columnOctetString.1.3.6.1.4.1.2011.5.1.1.13.1.28
hwAclIpv6AdvancedSrcMask
The object indicates the source IPv6-address mask of an ipv6 advanced acl rule. Its mode is positive.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.5.1.1.13.1.29
hwAclIpv6AdvancedAct
The object indicates the action of an ipv6 advanced acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the cond…
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.13.1.3
hwAclIpv6AdvancedDestMask
The object indicates the destination IPv6-address mask of an ipv6 advanced acl rule. Its mode is positive.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.5.1.1.13.1.30
hwAclIpv6AdvancedProtocolNew
The object indicates the protocol type of the rule. It specifies the protocol type over IP. The number of IPv6 protocol is 65535.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.31
hwAclIpv6AdvancedIcmpTypeEnd
The value of this object identifies the ICMPv6 message type. The value ranges from 0 to 255. The value 65535 is invalid. This object is used together with hwAclIpv6AdvancedIcmpTyp…
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.32
hwAclIpv6AdvancedVrfAny
The object indicates whether or not matching any VPN-instance.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.13.1.33
hwAclIpv6AdvancedSrcPoolName
The object indicates the source Ipv6 pool name.
columnOctetString.1.3.6.1.4.1.2011.5.1.1.13.1.34
hwAclIpv6AdvancedVni
The object indicates the ID of VXLAN, The invalid value is 0.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.35
hwAclIpv6AdvancedTcpFlag
The object indicates the code of TCP Sync flag(0~63), The invalid value is -1.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.36
hwAclIpv6AdvancedTcpFlagMask
The object indicates the mask of tcp-flag. The invalid value is 0.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.37
hwAclIpv6AdvancedSrcWild
The object indicates the wildcard mask of the source IPv6 address.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.5.1.1.13.1.38
hwAclIpv6AdvancedDestWild
The object indicates the wildcard mask of the destination IPv6 address.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.5.1.1.13.1.39
hwAclIpv6AdvancedProtocol
The value of this object identifies the number of the protocol over IPv6. The value ranges from 0 to 255. The value 0 indicates the IPv6 protocol.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.4
hwAclIpv6AdvancedSrcIp
The object indicates the source IPv6-address of an ipv6 advanced acl rule.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.5.1.1.13.1.5
hwAclIpv6AdvancedSrcPrefix
The value of this object identifies the mask length of the source IPv6 address. The value ranges from 0 to 128.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.6
hwAclIpv6AdvancedSrcOp
The object indicates the source Port operation symbol of an ipv6 advanced acl rule. It compares the port operators of source address. 'lt' means less than, 'eq' means equal to, 'g…
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.13.1.7
hwAclIpv6AdvancedSrcPort1
This object indicates the end source port number.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.8
hwAclIpv6AdvancedSrcPort2
This object indicates the start source port number.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.13.1.9