hwAclIpv6AdvancedSubitem
HUAWEI-ACL-MIB ·
.1.3.6.1.4.1.2011.5.1.1.13.1.2
Object
column
SNMPv2-SMIUnsigned32
The object specifies the number of an ipv6 advanced ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned automatically; otherwise, this rule will not be created.
Context
- MIB
- HUAWEI-ACL-MIB
- OID
.1.3.6.1.4.1.2011.5.1.1.13.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwAclIpv6AdvancedRuleEntry
- Table
- hwAclIpv6AdvancedRuleTable
- Siblings
- 38
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclIpv6AdvancedAclNum The index of ipv6 advanced acl table, the index range is (3000..3999 | 42768..75535). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.13.1.1 |
| hwAclIpv6AdvancedDestIp The object indicates the destination IPv6-address of an ipv6 advanced acl rule. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.13.1.10 |
| hwAclIpv6AdvancedDestPrefix The value of this object identifies the mask length of the destination IPv6 address. The value ranges from 0 to 128. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.11 |
| hwAclIpv6AdvancedDestOp The object indicates the destination Port operation symbol of an ipv6 advanced
acl group. It compares the port operators of destination address.
'lt' means less than,
'eq' means e… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.13.1.12 |
| hwAclIpv6AdvancedDestPort1 This object indicates the largest destination port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.13 |
| hwAclIpv6AdvancedDestPort2 This object indicates the smallest destination port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.14 |
| hwAclIpv6AdvancedPrecedence The value of this object identifies the precedence sub-field.
It is the higher three bits of the ToS field in an IPv6 header.
The value ranges from 0 to 7. The invalid value is 25… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.15 |
| hwAclIpv6AdvancedTos The value of this object identifies the ToS sub-field.
This field covers four bits after the higher three bits of the ToS field in an IPv6 header.
The value ranges from 0 to 15. T… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.16 |
| hwAclIpv6AdvancedDscp The value of this object identifies the higher seven bits of the ToS field in an IPv6 header.
The value ranges from 0 to 63. The invalid value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.17 |
| hwAclIpv6AdvancedEstablish The object indicates whether or not establishing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.13.1.18 |
| hwAclIpv6AdvancedTimeRangeIndex The value of this object identifies the index of the time range during which an ACL6 rule can be applied.
The value ranges from 0 to 256.
The value 0 indicates that no time range… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.19 |
| hwAclIpv6AdvancedIcmpType The value of this object identifies the ICMPv6 message type.
The value ranges from 0 to 255. The value 65535 is invalid. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.20 |
| hwAclIpv6AdvancedIcmpCode The value of this object identifies the code of an ICMPv6 message.
The value ranges from 0 to 255. The value 65535 is invalid. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.21 |
| hwAclIpv6AdvancedFragment The object indicates the type of the packet.
1: fragment, indicating that the packet is a fragment
255: none, invalid value
This object cannot be modified once a rule is crea… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.13.1.22 |
| hwAclIpv6AdvancedLog The object indicates whether to log the matched packets. The log
contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.13.1.23 |
| hwAclIpv6AdvancedEnable The object indicates whether the rule is valid or invalid. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.1.1.13.1.24 |
| hwAclIpv6AdvancedCount This object indicates the number of packets matched by a rule. A maximum of 64 bits are supported. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.1.1.13.1.25 |
| hwAclIpv6AdvancedVrfName This object indicates a VPN instance.
The length of a VPN instance name cannot exceed 31 characters. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.13.1.26 |
| hwAclIpv6AdvancedRowStatus RowStatus, Now support three state: CreateAndGo, Active, Destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.1.1.13.1.27 |
| hwAclIpv6AdvancedDescription The object indicates the description of this IPv6 advanced rule.
The object describes the usage of an IPv6 ACL with a word or a sentence. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.13.1.28 |
| hwAclIpv6AdvancedSrcMask The object indicates the source IPv6-address mask of an ipv6 advanced acl rule. Its mode is positive. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.13.1.29 |
| hwAclIpv6AdvancedAct The object indicates the action of an ipv6 advanced acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the cond… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.13.1.3 |
| hwAclIpv6AdvancedDestMask The object indicates the destination IPv6-address mask of an ipv6 advanced acl rule. Its mode is positive. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.13.1.30 |
| hwAclIpv6AdvancedProtocolNew The object indicates the protocol type of the rule.
It specifies the protocol type over IP. The number of IPv6 protocol is 65535. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.31 |
| hwAclIpv6AdvancedIcmpTypeEnd The value of this object identifies the ICMPv6 message type.
The value ranges from 0 to 255. The value 65535 is invalid.
This object is used together with hwAclIpv6AdvancedIcmpTyp… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.32 |
| hwAclIpv6AdvancedVrfAny The object indicates whether or not matching any VPN-instance. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.13.1.33 |
| hwAclIpv6AdvancedSrcPoolName The object indicates the source Ipv6 pool name. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.13.1.34 |
| hwAclIpv6AdvancedVni The object indicates the ID of VXLAN,
The invalid value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.35 |
| hwAclIpv6AdvancedTcpFlag The object indicates the code of TCP Sync flag(0~63),
The invalid value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.36 |
| hwAclIpv6AdvancedTcpFlagMask The object indicates the mask of tcp-flag.
The invalid value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.37 |
| hwAclIpv6AdvancedSrcWild The object indicates the wildcard mask of the source IPv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.13.1.38 |
| hwAclIpv6AdvancedDestWild The object indicates the wildcard mask of the destination IPv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.13.1.39 |
| hwAclIpv6AdvancedProtocol The value of this object identifies the number of the protocol over IPv6.
The value ranges from 0 to 255. The value 0 indicates the IPv6 protocol. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.4 |
| hwAclIpv6AdvancedSrcIp The object indicates the source IPv6-address of an ipv6 advanced acl rule. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.13.1.5 |
| hwAclIpv6AdvancedSrcPrefix The value of this object identifies the mask length of the source IPv6 address.
The value ranges from 0 to 128. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.6 |
| hwAclIpv6AdvancedSrcOp The object indicates the source Port operation symbol of an ipv6 advanced acl
rule. It compares the port operators of source address.
'lt' means less than,
'eq' means equal to,
'g… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.13.1.7 |
| hwAclIpv6AdvancedSrcPort1 This object indicates the end source port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.8 |
| hwAclIpv6AdvancedSrcPort2 This object indicates the start source port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.13.1.9 |