hpnicfdeNodeResetTcpAll
HPN-ICF-SNA-DLSW-EXT-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19
Object
scalar
r/w
Enumeration
Reset all TCP circuit switch. Any return value is meaningless.
Context
- MIB
- HPN-ICF-SNA-DLSW-EXT-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hpnicfdeNode
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | reset |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfdeNodeVendorID The value identifies the manufacturer's IEEE-assigned
Organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.1 |
| hpnicfdeNodeLocalPendTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.10 |
| hpnicfdeNodeRemotePendTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.11 |
| hpnicfdeNodeSnaCacheTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.12 |
| hpnicfdeNodeExplorerTimeout Define explorer timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.13 |
| hpnicfdeNodeExplorerWaitTimeout Define explorer waiting timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.14 |
| hpnicfdeNodeConfigSapList The SAP list indicates which SAPs are allowed.
Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the … | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15 |
| hpnicfdeNodeMaxTransmission The maximum retry times for TCP packet.
Default value is 5. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.16 |
| hpnicfdeNodeMulticastStatus Multicast support status. It is disabled by default. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.17 |
| hpnicfdeNodeMulticastAddress Multicast address. Default is 224.0.10.0.
When the hpnicfdeNodeMulticastStatus is disabled,
the multicast address is reset to 0.0.0.0. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.18 |
| hpnicfdeNodeIpAddrType The type of ip address: IPv4 or IPv6. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.2 |
| hpnicfdeNodeStCapTcpNum Tcp number reported in DLSw Capabilities Exchange. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.20 |
| hpnicfdeNodeTcpQueueMax The max length of TCP queue. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.21 |
| hpnicfdeNodeLocalAddr Local peer ip address. This ip address must have been
configured for a port on the router. If no local peer
ip address is configured, then this object will be the
empty string. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.3 |
| hpnicfdeNodePriority Peer priority advertised to remote peers in the DLSw Capabilities
Exchange. If an end station can reach through more
than one peer, the priority of each peer will be considered wh… | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.4 |
| hpnicfdeNodeInitPacingWindow Initial pacing window size. This is the starting size of the
pacing window. DLSw uses an adaptive pacing flow control
algorithm that automatically adjusts to congestion levels in
… | scalar | packets Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.5 |
| hpnicfdeNodeMaxPacingWindow Maximum pacing window size. This is the largest size that
the pacing window will grow to. DLSw uses an adaptive pacing
flow control algorithm that automatically adjusts to congest… | scalar | packets Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.6 |
| hpnicfdeNodeKeepAliveInterval Default remote peer keepalive interval in seconds.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow DLSw t… | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.7 |
| hpnicfdeNodePermitDynamic To accept connections from non-configured remote peer when
permitDynamic is specified. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.8 |
| hpnicfdeNodeConnTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.9 |