HPN-ICF-SNA-DLSW-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
11
Rows
11
Columns
67
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1 · 1 row entry · 7 columns
This table defines the peer transport connections
that will be initiated or accepted by this DLSw.
          
This table augments dlswTConnConfigTable.
hpnicfdeTConnConfigEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1
A list of objects that define specific configuration for
a DLSw peer transport connection.
Indexes
No indexes recorded
Column Syntax OID
hpnicfdeTConnConfigVersion
This value identifies which version (first octet) and release
(second octet) of the DLSw standard is supported by this
partner DLSw. This information is obtained from a DLSw
Capabilities Exchange message received from t…
OctetStringr/w
Constraints:
range: 2-2
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.1
hpnicfdeTConnConfigPriority
The priority for remote peer.
Integer32r/w
Constraints:
range: 1-5
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.2
hpnicfdeTConnConfigLfSize
The largest frame size.
DLSW-MIBLFSizer/w
Textual Convention: DLSW-MIBLFSize Enumeration
Type Values:
516lfs516
635lfs635
754lfs754
873lfs873
993lfs993
1112lfs1112
1231lfs1231
1350lfs1350
1470lfs1470
1542lfs1542
1615lfs1615
1688lfs1688
1761lfs1761
1833lfs1833
1906lfs1906
1979lfs1979
2052lfs2052
2345lfs2345
2638lfs2638
2932lfs2932
3225lfs3225
3518lfs3518
3812lfs3812
4105lfs4105
4399lfs4399
4865lfs4865
5331lfs5331
5798lfs5798
6264lfs6264
6730lfs6730
7197lfs7197
7663lfs7663
8130lfs8130
8539lfs8539
8949lfs8949
9358lfs9358
9768lfs9768
10178lfs10178
10587lfs10587
10997lfs10997
11407lfs11407
12199lfs12199
12992lfs12992
13785lfs13785
14578lfs14578
15370lfs15370
16163lfs16163
16956lfs16956
17749lfs17749
20730lfs20730
23711lfs23711
26693lfs26693
29674lfs29674
32655lfs32655
38618lfs38618
41600lfs41600
44591lfs44591
47583lfs47583
50575lfs50575
53567lfs53567
56559lfs56559
59551lfs59551
65535lfs65535
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.3
hpnicfdeTConnConfigKeepaliveIntval
The keepalive interval value.
secondsInteger32r/w
Constraints:
range: 1-1200
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.4
hpnicfdeTConnConfigBackup
The current remote peer is configured as the
backup of another configured remote peer.
Enumerationr/w
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.5
hpnicfdeTConnConfigBackupTAddr
It is the ip address of a configured remote peer of which
the current remote peer is configrued as backup.
DLSW-MIBTAddressr/w
Textual Convention: DLSW-MIBTAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.6
hpnicfdeTConnConfigBackupLinger
Backup peer linger.
minutesInteger32r/w
Constraints:
range: 0-1440
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.7
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2 · 1 row entry · 9 columns
A list of peer transport connections.
Each connected peer will create a conceptual row in the table.
When the peer disconnects, the row will be deleted from the table.
          
This table augments dlswTConnOperTable.
hpnicfdeTConnOperEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1
A list of objects that contain spefific operational
information for a DLSw peer transport connection.
Indexes
No indexes recorded
Column Syntax OID
hpnicfdeTConnOperPeerType
The current remote peer is configured when the value is 'configured'.
Enumeration
Enumerated Values:
1configured
2learningDynamic
3other
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.1
hpnicfdeTConnOperVendorID
The value identifies the manufacturer's IEEE-assigned
Organizationally Unique Identifier (OUI) of remote peer.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.2
hpnicfdeTConnOperVersionString
Version information of remote peer. The length up to 512 bytes.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.3
hpnicfdeTConnOperUpTime
The amount of time (in seconds) since this transport
connection last entered the 'connected' state.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.4
hpnicfdeTConnOperMulticastAddress
When remote peer supports DLSw2.0, this node identifies
its multicast address.
DLSW-MIBTAddress
Textual Convention: DLSW-MIBTAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.5
hpnicfdeTConnOperStCapTcpNumber
Number of tcp supported when capabilities exchanging.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.6
hpnicfdeTConnOperRecvPkts
The number of Switch-to-Switch Protocol (SSP) messages
received on this tcp transport connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.7
hpnicfdeTConnOperSendPkts
The number of SSP messages
sent on this tcp transport connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.8
hpnicfdeTConnOperDropPkts
The number of SSP messages
dropped on this tcp transport connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.9
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3 · 1 row entry · 1 columns
This table defines the TCP transport connections that
will be either initiated by or accepted by this DSLw.
It augments the entries in dlswTConnConfigTable whose
domain is dlswTCPDomain. In other words for each conceptual row
in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is
dlswTCPDomain, that conceptual row will be augmented by this
table.
          
dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain
are all imported from DLSW-MIB (RFC 2024).
          
This table augments dlswTConnTcpConfigTable.
hpnicfdeTConnTcpConfigEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1
A list of objects that define specific configuration for
a DLSw peer transport connection within the dlswTCPDomain.
dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
Indexes
No indexes recorded
Column Syntax OID
hpnicfdeTConnTcpConfigQueueMax
Maximum output TCP queue size for this remote peer.
For DLSw over TCP encapsulation, packets may be queued
due to congestion of the TCP network. This variable
is used to set the output queue maximum of the underlying
TC…
Integer32r/w
Constraints:
range: 50-2000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1.1
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1 · 1 row entry · 2 columns
A list of bridge group which is serving for DLSw.
hpnicfdeBridgeEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1
A list of bridge information.
Indexes
hpnicfdeBridgeNumIndex
Column Syntax OID
hpnicfdeBridgeNumIndex
This value identifies the bridge number.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.1
hpnicfdeBridgeRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.2
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2 · 1 row entry · 2 columns
The list of interface on which DLSw is active.
hpnicfdeBridgeIfEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1
The list of bridge interface information.
Indexes
Column Syntax OID
hpnicfdeBridgeIfBrgGrp
This value identifies the bridge number attached
to the interface.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.1
hpnicfdeBridgeIfRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.2
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1 · 1 row entry · 6 columns
The table defines attributes related for those
QLLC that participate in data link switching.
hpnicfdeQllcEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1
The ifIndex belongs to the interface which link protocol is x.25.
Indexes
Column Syntax OID
hpnicfQllcX121Address
X.121 address.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.1
hpnicfQllcLocalMac
The virtual MAC address used to represent the QLLC-attached
link station to the rest of the DLSw network.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.2
hpnicfQllcLocalSap
The SAP used to represent this link station.
OctetStringr/w
Constraints:
range: 1-1
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.3
hpnicfQllcRemoteMac
The MAC address to which DLSw should attempt to connect
this link station. If this information is not available,
a length of zero for this object should be returned.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.4
hpnicfQllcRemoteSap
The SAP of the remote station to which this link
station should be connected. If this information
is not available, a length of zero for this object
should be returned.
OctetStringr/w
Constraints:
range: 0-1
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.5
hpnicfQllcRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1 · 1 row entry · 11 columns
The table defines parameters for the interfaces
whose link protocol is SDLC.
hpnicfdeSdlcPortEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1
Sdlc port entry.
Indexes
Column Syntax OID
hpnicfdeSdlcPortRole
The SDLC role of interface.
Enumerationr/w
Enumerated Values:
1primary
2seconday
3norole
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.1
hpnicfdeSdlcPortSendWindow
Size of local send window.
Integer32r/w
Constraints:
range: 1-7
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.2
hpnicfdeSdlcPortModulo
Size of modulus.
Enumerationr/w
Enumerated Values:
8m8
128m128
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.3
hpnicfdeSdlcPortMaxPdu
Maximum bytes for incoming frames.
Integer32r/w
Constraints:
range: 1-17600
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.4
hpnicfdeSdlcPortMaxSendQueue
Size of hold queue.
Integer32r/w
Constraints:
range: 20-255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.5
hpnicfdeSdlcPortMaxTransmission
Number of times to retry an operation.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.6
hpnicfdeSdlcPortSimultaneousEnable
Activate SDLC two-way simultaneous mode.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.7
hpnicfdeSdlcPortTimerACK
Time to wait for a reply to a frame.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.8
hpnicfdeSdlcPortTimerLifeTime
Time to wait for a reply used by secondary station.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.9
hpnicfdeSdlcPortTimerPollPause
Time between polls for each secondary SDLC station.
millisecondsInteger32r/w
Constraints:
range: 1-10000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.10
hpnicfdeSdlcPortRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.11
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1 · 1 row entry · 13 columns
This table defines parameters for the Ethernet interface.
hpnicfdeLlc2PortEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1
LLC2 port entry.
Indexes
Column Syntax OID
hpnicfdeLlc2PortMaxAck
Maximum of I-frames received before ACK.
Integer32r/w
Constraints:
range: 1-127
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.1
hpnicfdeLlc2PortMaxPdu
Maximum of LLC2 pdu length.
Integer32r/w
Constraints:
range: 1-1700
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.2
hpnicfdeLlc2PortMaxSendQueue
Queue for sending llc2 I-frames.
Integer32r/w
Constraints:
range: 20-200
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.3
hpnicfdeLlc2PortMaxTransmission
Retry times of operations.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.4
hpnicfdeLlc2PortModulo
Modulus of LLC2.
Enumerationr/w
Enumerated Values:
8m8
128m128
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.5
hpnicfdeLlc2PortReceiveWindow
Maximum number of I-frames to send before received ACK.
Integer32r/w
Constraints:
range: 1-127
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.6
hpnicfdeLlc2PortTimerAck
Waiting for ACK time after sending an I-frame.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.7
hpnicfdeLlc2PortTimerAckDelay
Maximum time allows I-frames incoming without replay ACK.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.8
hpnicfdeLlc2PortTimerDetect
Detect the link status.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.9
hpnicfdeLlc2PortTimerBusy
Waiting time while other LLC2 station is in busy state.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.10
hpnicfdeLlc2PortTimerPoll
Waiting time after a P frame is sent.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.11
hpnicfdeLlc2PortTimerReject
Waiting time after a REJ frame is sent.
millisecondsInteger32r/w
Constraints:
range: 1-60000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.12
hpnicfdeLlc2PortRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.13
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3 · 1 row entry · 7 columns
Reachable cache table.
hpnicfdeRchCacheEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1
Reachable cache entry.
Indexes
hpnicfdeRchCacheIndex
Column Syntax OID
hpnicfdeRchCacheIndex
Index of reachable cache entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.1
hpnicfdeRchCacheStatus
Current status of reachable cache entry.
Enumeration
Enumerated Values:
1found
2verify
3noCacheInfo
4exploring
5waiting
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.2
hpnicfdeRchCacheRemainTime
Remain time of reachable cache entry.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.3
hpnicfdeRchCacheMac
MAC address of reachable cache entry.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.4
hpnicfdeRchCacheRemoteIpAddrType
Remote peer ip address type.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.5
hpnicfdeRchCacheRemoteIp
Remote peer ip address of reachable cache entry.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.6
hpnicfdeRchCacheRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.7
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3 · 1 row entry · 4 columns
Information of interface which works for DLSw Ethernet redundancy.
hpnicfdeEBIfEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1
Parameters defined for DLSw Ethernet redundancy interface.
Indexes
Column Syntax OID
hpnicfdeEBMulticastMac
Multicast MAC address configured for the Ethernet
redundancy of dlsw module. When Ethernet redundancy
is inactive, its value is '000000000000'H.
To active Ethernet redundancy, give it a valid multicast MAC address.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.1
hpnicfdeEBPriority
Priority configured for the Ethernet redundancy of DLSw module.
Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.2
hpnicfdeEBtimer
Timer for the Ethernet redundancy of DLSw module.
Integer32r/w
Constraints:
range: 100-5000
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.3
hpnicfdeEBRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.4
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4 · 1 row entry · 5 columns
MAC address mapping table.
hpnicfdeEBMacMapEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1
MAC address mapping entry.
Indexes
RFC1213-MIBifIndex hpnicfdeEBMacMapIndex
Column Syntax OID
hpnicfdeEBMacMapIndex
Index of MAC address mapping entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.1
hpnicfdeEBMacMapLocalMac
Local MAC address in MAC address mapping.
When creating a new conceptual row, hpnicfdeEBMacMapLocalMac
and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2
hpnicfdeEBMacMapRemoteMac
Remote MAC address of MAC address mapping.
When creating a new conceptual row, hpnicfdeEBMacMapLocalMac
and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.3
hpnicfdeEBMacMapNeighbour
Neighbour of MAC address mapping.
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.4
hpnicfdeEBMacMapRowStatus
Status of MAC address mapping entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.5