hpnicfNqaStatResNumOfDelaySD
HPN-ICF-NQA-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22
Object
column
SNMPv2-SMICounter32
The number of one way times from source to destination that are successfully measured.
Context
- MIB
- HPN-ICF-NQA-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpnicfNqaStatisticsResultsEntry
- Table
- hpnicfNqaStatisticsResultsTable
- Siblings
- 30
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfNqaStatResIndex An entry in this table is created when the statistics
result of a NQA probe is determined.
An implementation MUST start assigning
hpnicfNqaStatResIndex values at 1 … | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1 |
| hpnicfNqaStatResStartTime This object contains the start time of the statistic. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10 |
| hpnicfNqaStatResInterval This object contains the interval between two times of statistic. | column | seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11 |
| hpnicfNqaStatResRttNumDisconnects The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12 |
| hpnicfNqaStatResRttTimeouts The number of times that a probe failed because the probe timed out. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13 |
| hpnicfNqaStatResRttBusies The number of times that a NQA probe failed because
errors related to sockets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14 |
| hpnicfNqaStatResRttNoConnections The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15 |
| hpnicfNqaStatResRttDrops The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16 |
| hpnicfNqaStatResRttSequenceErrors The number of packets arrived out of sequence. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17 |
| hpnicfNqaStatResRttErrors The number of other errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18 |
| hpnicfNqaStatResLostPacketRatio The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent pa… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19 |
| hpnicfNqaStatResIpTargetAddressType This object indicates the type of address stored
in the corresponding hpnicfNqaStatResIpTargetAddress
object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2 |
| hpnicfNqaStatResPacketLateArrival The value of this object reflects the number of the packets that
arrived after the timeout. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20 |
| hpnicfNqaStatResRttSum This object contains the sum of the squares for all NQA
responses received during the test lifetime. The value of this object
MUST be reported as 0 when no NQA responses have been… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21 |
| hpnicfNqaStatResMinDelaySD The minimum one way times from source to destination. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23 |
| hpnicfNqaStatResMaxDelaySD The maximum one way times from source to destination. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24 |
| hpnicfNqaStatResSumDelaySD The sum of one way times from source to destination. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25 |
| hpnicfNqaStatResSum2DelaySD The sum of squares of one way times from source to destination. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26 |
| hpnicfNqaStatResNumOfDelayDS The number of one way times from destination to source that are
successfully measured. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27 |
| hpnicfNqaStatResMinDelayDS The minimum one way times from destination to source. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28 |
| hpnicfNqaStatResMaxDelayDS The maximum one way times from destination to source. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29 |
| hpnicfNqaStatResIpTargetAddress This object represent the host address to be used at a remote host for
performing a network analysis operation. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3 |
| hpnicfNqaStatResSumDelayDS The sum of one way times from destination to source. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30 |
| hpnicfNqaStatResSum2DelayDS The sum of squares of one way times from destination to source. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31 |
| hpnicfNqaStatResMinRtt The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4 |
| hpnicfNqaStatResMaxRtt The maximum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5 |
| hpnicfNqaStatResAverageRtt The average NQA probe round-trip-time (RTT). | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6 |
| hpnicfNqaStatResProbeResponses The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7 |
| hpnicfNqaStatResSentProbes The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8 |
| hpnicfNqaStatResRttSumOfSquares This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received. | column | milliseconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9 |