hpnicfNqaStatResIpTargetAddressType

HPN-ICF-NQA-MIB · .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2
MIB view Table view

Object

column INET-ADDRESS-MIBInetAddressType 
This object indicates the type of address stored
in the corresponding hpnicfNqaStatResIpTargetAddress
object.

Context

MIB
HPN-ICF-NQA-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2
Type
column
Access
readonly
Status
current
Parent
hpnicfNqaStatisticsResultsEntry
Table
hpnicfNqaStatisticsResultsTable
Siblings
30

Syntax

INET-ADDRESS-MIBInetAddressType
Source
INET-ADDRESS-MIBInetAddressType
Base type
Enumeration

Values & Constraints

Type Values
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfNqaStatResIndex
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 …
columnUnsigned32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1
hpnicfNqaStatResStartTime
This object contains the start time of the statistic.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10
hpnicfNqaStatResInterval
This object contains the interval between two times of statistic.
columnseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11
hpnicfNqaStatResRttNumDisconnects
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12
hpnicfNqaStatResRttTimeouts
The number of times that a probe failed because the probe timed out.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13
hpnicfNqaStatResRttBusies
The number of times that a NQA probe failed because errors related to sockets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14
hpnicfNqaStatResRttNoConnections
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15
hpnicfNqaStatResRttDrops
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16
hpnicfNqaStatResRttSequenceErrors
The number of packets arrived out of sequence.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17
hpnicfNqaStatResRttErrors
The number of other errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18
hpnicfNqaStatResLostPacketRatio
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent pa…
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19
hpnicfNqaStatResPacketLateArrival
The value of this object reflects the number of the packets that arrived after the timeout.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20
hpnicfNqaStatResRttSum
This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21
hpnicfNqaStatResNumOfDelaySD
The number of one way times from source to destination that are successfully measured.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22
hpnicfNqaStatResMinDelaySD
The minimum one way times from source to destination.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23
hpnicfNqaStatResMaxDelaySD
The maximum one way times from source to destination.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24
hpnicfNqaStatResSumDelaySD
The sum of one way times from source to destination.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25
hpnicfNqaStatResSum2DelaySD
The sum of squares of one way times from source to destination.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26
hpnicfNqaStatResNumOfDelayDS
The number of one way times from destination to source that are successfully measured.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27
hpnicfNqaStatResMinDelayDS
The minimum one way times from destination to source.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28
hpnicfNqaStatResMaxDelayDS
The maximum one way times from destination to source.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29
hpnicfNqaStatResIpTargetAddress
This object represent the host address to be used at a remote host for performing a network analysis operation.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3
hpnicfNqaStatResSumDelayDS
The sum of one way times from destination to source.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30
hpnicfNqaStatResSum2DelayDS
The sum of squares of one way times from destination to source.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31
hpnicfNqaStatResMinRtt
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4
hpnicfNqaStatResMaxRtt
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5
hpnicfNqaStatResAverageRtt
The average NQA probe round-trip-time (RTT).
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6
hpnicfNqaStatResProbeResponses
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7
hpnicfNqaStatResSentProbes
The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
columnprobes SNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8
hpnicfNqaStatResRttSumOfSquares
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
columnmilliseconds SNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9