hpnicfifEthernetIsolate
HPN-ICF-LswINF-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13
Object
column
r/w
OctetString
Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.
Context
- MIB
- HPN-ICF-LswINF-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfethernetEntry
- Table
- hpnicfethernetTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfifEthernetTest Test this interface.
The actual testing will be different according to products.
Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.10 |
| hpnicfifMacAddrLearnMode Status indicates mac address learn mode of the interface.
IVL(1) means independent VLAN learning.
SVL means shared VLAN learning. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.11 |
| hpnicfifEthernetFlowInterval Set flow interval of the ethernet.
The NMS should set value to integer which is a multiple of 5. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.12 |
| hpnicfifVlanVPNStatus Vlan VPN enable status. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.14 |
| hpnicfifVlanVPNUplinkStatus Vlan VPN uplink status. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.15 |
| hpnicfifVlanVPNTPID Port based Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100.
Please refer to hpnicfVlanVPNTPIDMode to get more information. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.16 |
| hpnicfifIsolateGroupID Isolate group identifier. Value zero means this interface does not
belong to any isolate group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.17 |
| hpnicfifisUplinkPort Ethernet uplink status, default value is 2. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.18 |
| hpnicfifEthernetAutoSpeedMask This object specifies which kinds of speed mode can be negotiated.
Each bit corresponds to a kind of speed mode.
If the value of a bit is '1', it means the correspo… | column | SpeedModeFlag | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19 |
| hpnicfifEthernetAutoSpeed This object indicates which kinds of speed mode are negotiable
on this port.
Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding
bit of this … | column | SpeedModeFlag | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.20 |
| hpnicfifEthernetDuplex Ethernet interface mode. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.3 |
| hpnicfifEthernetMTU MTU on the Ethernet interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.4 |
| hpnicfifEthernetSpeed Ethernet interface speed. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.5 |
| hpnicfifEthernetMdi Type of the line connected to the port.
MDI-II (straight-through cable): 1
MDI-X (crossover cable): 2
MDI-AUTO (auto-sensing): 3 | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.7 |
| hpnicfMaxMacLearn The maximum number of MAC addresses that the port can learn.
The value -1 means that the number of Mac addresses that the port
can learn is unlimited. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.8 |
| hpnicfifMacAddressLearn This object indicates if the interface is allowed to learn mac address.
eanbled(1) means the interface can learn mac address, otherwise disabled(2)
can be set. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.9 |