hpnicfifEthernetAutoSpeedMask

HPN-ICF-LswINF-MIB · .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19
MIB view Table view

Object

column SpeedModeFlag 
This object specifies which kinds of speed mode can be negotiated.
Each bit corresponds to a kind of speed mode.
              
If the value of a bit is '1', it means the corresponding speed mode
is negotiable on the port. Otherwise the negotiation for that
kind of speed mode is not supported on this port. If there are
several negotiable speed modes, all bits for them  are '1'.
For example, if the speed mode 's10M' and 's1000M' can be negotiable,
the value of this object is 0xA0.

Context

MIB
HPN-ICF-LswINF-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19
Type
column
Access
readonly
Status
current
Parent
hpnicfethernetEntry
Table
hpnicfethernetTable
Siblings
16

Syntax

SpeedModeFlag
Source
SpeedModeFlag
Base type
Bits

Values & Constraints

Type Values
0s10M
1s100M
2s1000M
3s10000M
4s24000M
5s40000M
6s100000M

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfifEthernetTest
Test this interface. The actual testing will be different according to products. Read operation not supported.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.10
hpnicfifMacAddrLearnMode
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.11
hpnicfifEthernetFlowInterval
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.12
hpnicfifEthernetIsolate
Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, wit…
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13
hpnicfifVlanVPNStatus
Vlan VPN enable status.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.14
hpnicfifVlanVPNUplinkStatus
Vlan VPN uplink status.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.15
hpnicfifVlanVPNTPID
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hpnicfVlanVPNTPIDMode to get more information.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.16
hpnicfifIsolateGroupID
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.17
hpnicfifisUplinkPort
Ethernet uplink status, default value is 2.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.18
hpnicfifEthernetAutoSpeed
This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding bit of this …
columnSpeedModeFlag.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.20
hpnicfifEthernetDuplex
Ethernet interface mode.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.3
hpnicfifEthernetMTU
MTU on the Ethernet interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.4
hpnicfifEthernetSpeed
Ethernet interface speed.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.5
hpnicfifEthernetMdi
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.7
hpnicfMaxMacLearn
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.8
hpnicfifMacAddressLearn
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.9