hpnicfEntityExtErrorStatus
HPN-ICF-ENTITY-EXT-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.19
Object
column
Enumeration
Indicate the error state of this entity object. Now it only
supports Port, general power supply, RPS power supply and
board/Subcard. It may have one of these values.
The following four values can be used for all kinds of entities.
notSupported(1) means this entity cannot support this function.
normal(2) means the statement of this entity is normal. for ports,
it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and
half-duplex. For fan, power supply and board-Subcard, it means
their states are normal.
postFailure(3) means the entity fails to POST.
entityAbsent(4) means the entity is absent now.
The following values is depended on the entity.
For Port entities, it may have the following values. If its POST
is failure,
then the value of the instance will be postFailure(3), otherwise
the value will be normal(2).
If enable power supply over Ethernet on this port is failure,
the value of this instance will be poeError(11), otherwise it will
be normal(2).
For stack port, if it connects to another stack port normally, and
these two units merge into one stack, then the value of this
instance will be normal(2).
If something wrong occurs and the unit cannot merge into stack,
the value of this instance will be stackPortFailed(23). If the
stack port forms resilient daisy chain with another stack port
on the other unit, the value of this instance will be
stackPortBlocked(22).
For SFP ports, if it fail to receive, the value of this instance
will be sfpRecvError(31), if it fail to send, the value is
sfpSendError(32), if it fail to send and receive, the value is
sfpBothError(33), otherwise it will be normal(2).
fanError(41) means that the fan stops working.
psuError(51) means that the Power Supply Unit is in the state of
fault.
rpsError(61) means the RPS is in the state of fault.
moduleFaulty(71) means the Module is in the state of fault.
sensorError(81) means the sensor is in the state of fault.
hardwareFaulty(91) means the hardware of specified entity is in the state of fault.
NMS must be compatible with the states which may be added
in the future.
Context
- MIB
- HPN-ICF-ENTITY-EXT-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpnicfEntityExtStateEntry
- Table
- hpnicfEntityExtStateTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notSupported |
2 | normal |
3 | postFailure |
4 | entityAbsent |
11 | poeError |
21 | stackError |
22 | stackPortBlocked |
23 | stackPortFailed |
31 | sfpRecvError |
32 | sfpSendError |
33 | sfpBothError |
41 | fanError |
51 | psuError |
61 | rpsError |
71 | moduleFaulty |
81 | sensorError |
91 | hardwareFaulty |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfEntityExtPhysicalIndex The index of hpnicfEntityExtStateTable.
This index is identical to entPhysicalIndex in ENTITY-MIB | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.1 |
| hpnicfEntityExtMemSize The size of memory for the entity.
If the amount of memory exceeds 4,294,967,295 bytes,
the value remains 4,294,967,295 bytes. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.10 |
| hpnicfEntityExtUpTime The uptime for the entity. The meaning of uptime is
when the entity is up, and the value of the object
will add 1 seconds while the entity is running. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.11 |
| hpnicfEntityExtTemperature The temperature for the entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.12 |
| hpnicfEntityExtTemperatureThreshold The threshold for the temperature. When the temperature
exceeds the threshold, a notification will be sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.13 |
| hpnicfEntityExtVoltage The voltage for the entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.14 |
| hpnicfEntityExtVoltageLowThreshold The low-threshold for the voltage.
When voltage is lower than low-threshold, a notification will be
sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.15 |
| hpnicfEntityExtVoltageHighThreshold The high-threshold for the voltage.
When voltage greater than high-threshold, a notification will be
sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.16 |
| hpnicfEntityExtCriticalTemperatureThreshold The threshold for the critical Temperature. When temperature
exceeds the critical temperature, a notification will be sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.17 |
| hpnicfEntityExtMacAddress MAC Address of the entity. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.18 |
| hpnicfEntityExtAdminStatus The administrative state for this object. | column | HpnicfAdminState | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.2 |
| hpnicfEntityExtCpuMaxUsage The maximal CPU usage for the entity in the period of time. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.20 |
| hpnicfEntityExtLowerTemperatureThreshold The threshold for the lower Temperature. When temperature runs
under the threshold, a notification will be sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.21 |
| hpnicfEntityExtShutdownTemperatureThreshold The threshold for the shutdown Temperature. When temperature
exceeds the threshold, a notification will be sent and the entity
will be shutdown. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.22 |
| hpnicfEntityExtPhyMemSize The memory size of entity. This is the physical attribute of entity. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.23 |
| hpnicfEntityExtPhyCpuFrequency The CPU frequency of entity. Unit of measure is MHZ. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.24 |
| hpnicfEntityExtFirstUsedDate The first used date of the entity. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.25 |
| hpnicfEntityExtCpuAvgUsage The average CPU usage for the entity in a period of time. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.26 |
| hpnicfEntityExtMemAvgUsage The average memory usage for the entity in a period of time. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.27 |
| hpnicfEntityExtMemType The memory type of entity. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.28 |
| hpnicfEntityExtCriticalLowerTemperatureThreshold The threshold for the critical Temperature. When temperature
exceeds the critical lower temperature, a notification will be sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.29 |
| hpnicfEntityExtOperStatus The operate state for this object. | column | HpnicfOperState | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.3 |
| hpnicfEntityExtShutdownLowerTemperatureThreshold The threshold for the shutdown Temperature. When temperature
exceeds the lower threshold, a notification will be sent and the entity
will be shutdown. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.30 |
| hpnicfEntityExtCpuUsageRecoverThreshold The recover threshold for the CPU usage. When the CPU usage falls down to
the threshold, a notification is sent. The hpnicfEntityExtCpuUsageRecoverThreshold
must be less than or… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.31 |
| hpnicfEntityExtMemSizeRev Size of memory space for the entity.
This node is used to replace hpnicfEntityExtMemSize. | column | bytes HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.32 |
| hpnicfEntityExtCpuUsageIn1Minute The CPU usage in last one minute for this entity.
Generally, the overall CPU usage on the entity is
calculated, independent of the number of CPUs on
the entity. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.33 |
| hpnicfEntityExtCpuUsageIn5Minutes The CPU usage in last five minutes for this entity.
Generally, the overall CPU usage on the entity is
calculated, independent of the number of CPUs on
the entity. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.34 |
| hpnicfEntityExtStandbyStatus This object is used for monitoring standby status.
Not all entities support this object. | column | HpnicfStandbyStatus | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.4 |
| hpnicfEntityExtAlarmLight The alarm status for this entity. It does not include
the severity of alarms raised on child components. In
this condition, there will be a alarm light on the entity,
the object s… | column | HpnicfAlarmStatus | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.5 |
| hpnicfEntityExtCpuUsage The CPU usage for this entity. Generally, the overall
CPU usage on the entity is calculated, independent of
the number of CPUs on the entity. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.6 |
| hpnicfEntityExtCpuUsageThreshold The threshold for the CPU usage. When the CPU usage exceeds
the threshold, a notification will be sent. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.7 |
| hpnicfEntityExtMemUsage The memory usage for the entity. This object indicates what
percent of memory are used. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.8 |
| hpnicfEntityExtMemUsageThreshold The threshold for the Memory usage, When the memory usage
exceeds the threshold, a notification will be sent. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.9 |