configedSubnetMask
HP700RX-MIB ·
.0.11.2.3.9.3.1.2.3
Object
scalar
mandatory
r/w
The subnet mask configured for the Ethernet
interface on this terminal.
The active value for this field is set at
startup. After startup a different value can be
saved to terminal memory without being used,
therefore the value returned via SNMP is not
necessarily the value currently in use.
Context
- MIB
- HP700RX-MIB
- OID
.0.11.2.3.9.3.1.2.3- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- network
- Siblings
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| networkParamsFrom mandatory Indicates whether the X terminal will use
bootp to get its network parameters (IP address,
default gateway, boot file, terminal name,
domain name, name server addresses, subnet… | scalar | Enumeration | .0.11.2.3.9.3.1.2.1 |
| primaryNameServer mandatory The primary name server's IP address
in dotted decimal format. | scalar | - | .0.11.2.3.9.3.1.2.10 |
| alternateNameServer mandatory The alternative name server's IP address
in dotted decimal format. If no answer is received
from the primary name server, the terminal attempts
to contact this name server. | scalar | - | .0.11.2.3.9.3.1.2.11 |
| domain mandatory The fully qualified domain of the network to
which the terminal is connected. This includes
all parts following the first '.' (dot) in the
fully qualified host name of the termin… | scalar | - | .0.11.2.3.9.3.1.2.12 |
| terminalName mandatory The name assigned to this terminal. This
name should correspond to the name assigned
using the Domain Name service, Network Information
Services, and other host address lookup mec… | scalar | - | .0.11.2.3.9.3.1.2.13 |
| slipLocalAddress mandatory The address used for the terminal end of
the SLIP connection. | scalar | - | .0.11.2.3.9.3.1.2.14 |
| slipRemoteAddress mandatory The address used for the remote (host) end
end of the SLIP connection. | scalar | - | .0.11.2.3.9.3.1.2.15 |
| slipMask mandatory The subnet mask configured for the SLIP
interface on this terminal. | scalar | - | .0.11.2.3.9.3.1.2.16 |
| configedAddress mandatory The IP address configured for the Ethernet
interface on this terminal.
The active value for this field is set at
startup. After startup a different value can be
sav… | scalar | - | .0.11.2.3.9.3.1.2.2 |
| configedRouteTable mandatory The routes configured for this terminal.
At startup the terminal tests the routes
in its routing table. If any route fails,
it will be discarded, therefore the configur… | table | - | .0.11.2.3.9.3.1.2.4 |
| primaryFileServer mandatory The address of the first file server the terminal
attempts to contact at startup. This may be
either a node name (in which case it will be
resolved to an address using Domain Name… | scalar | - | .0.11.2.3.9.3.1.2.5 |
| primaryAccessMethod mandatory The method used to read files from the primary
file server. This method may be overridden for
individual paths. | scalar | Enumeration | .0.11.2.3.9.3.1.2.6 |
| alternateFileServer mandatory The address of the file server the terminal
will attempt to contact at startup if the primary
file server cannot be reached. This address
may be the node name (in which case it … | scalar | - | .0.11.2.3.9.3.1.2.7 |
| alternateAccessMethod mandatory The method used to read files from the alternative
file server. This method may be overridden for
individual pathes. | scalar | Enumeration | .0.11.2.3.9.3.1.2.8 |
| fileTimeout mandatory The maximum time (in seconds) that the terminal
will wait for a response to a request to the file
server before giving up. The name resolver timeout
is six times the file timeout. | scalar | Integer32 | .0.11.2.3.9.3.1.2.9 |