configedRouteTable

HP700RX-MIB · .0.11.2.3.9.3.1.2.4

MIB view Table view

Object

table mandatory

The routes configured for this terminal.
          
At startup the terminal tests the routes
in its routing table. If any route fails,
it will be discarded, therefore the configured
routes may not be the routes in use.
There are a number of ways a route can fail
the startup tests, including: terminal can't ping
the gateway, terminal can't resolve one of the 
names into an IP address, or a specified gateway 
is not on a connected subnet.

Context

MIB: HP700RX-MIB
OID: .0.11.2.3.9.3.1.2.4
Type: table
Status: mandatory
Parent: network
Siblings: 15
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
networkParamsFrom mandatory Indicates whether the X terminal will use bootp to get its network parameters (IP address, default gateway, boot file, terminal name, domain name, name server addresses, subnet…	scalar	Enumeration	`.0.11.2.3.9.3.1.2.1`
primaryNameServer mandatory The primary name server's IP address in dotted decimal format.	scalar	-	`.0.11.2.3.9.3.1.2.10`
alternateNameServer mandatory The alternative name server's IP address in dotted decimal format. If no answer is received from the primary name server, the terminal attempts to contact this name server.	scalar	-	`.0.11.2.3.9.3.1.2.11`
domain mandatory The fully qualified domain of the network to which the terminal is connected. This includes all parts following the first '.' (dot) in the fully qualified host name of the termin…	scalar	-	`.0.11.2.3.9.3.1.2.12`
terminalName mandatory The name assigned to this terminal. This name should correspond to the name assigned using the Domain Name service, Network Information Services, and other host address lookup mec…	scalar	-	`.0.11.2.3.9.3.1.2.13`
slipLocalAddress mandatory The address used for the terminal end of the SLIP connection.	scalar	-	`.0.11.2.3.9.3.1.2.14`
slipRemoteAddress mandatory The address used for the remote (host) end end of the SLIP connection.	scalar	-	`.0.11.2.3.9.3.1.2.15`
slipMask mandatory The subnet mask configured for the SLIP interface on this terminal.	scalar	-	`.0.11.2.3.9.3.1.2.16`
configedAddress mandatory The IP address configured for the Ethernet interface on this terminal. The active value for this field is set at startup. After startup a different value can be sav…	scalar	-	`.0.11.2.3.9.3.1.2.2`
configedSubnetMask mandatory The subnet mask configured for the Ethernet interface on this terminal. The active value for this field is set at startup. After startup a different value can be s…	scalar	-	`.0.11.2.3.9.3.1.2.3`
primaryFileServer mandatory The address of the first file server the terminal attempts to contact at startup. This may be either a node name (in which case it will be resolved to an address using Domain Name…	scalar	-	`.0.11.2.3.9.3.1.2.5`
primaryAccessMethod mandatory The method used to read files from the primary file server. This method may be overridden for individual paths.	scalar	Enumeration	`.0.11.2.3.9.3.1.2.6`
alternateFileServer mandatory The address of the file server the terminal will attempt to contact at startup if the primary file server cannot be reached. This address may be the node name (in which case it …	scalar	-	`.0.11.2.3.9.3.1.2.7`
alternateAccessMethod mandatory The method used to read files from the alternative file server. This method may be overridden for individual pathes.	scalar	Enumeration	`.0.11.2.3.9.3.1.2.8`
fileTimeout mandatory The maximum time (in seconds) that the terminal will wait for a response to a request to the file server before giving up. The name resolver timeout is six times the file timeout.	scalar	Integer32	`.0.11.2.3.9.3.1.2.9`

Child Objects