mplsTunnelPathInUse

HP-SN-MPLS-TE-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.30
MIB view Table view

Object

column r/w HP-SN-MPLS-TC-MIBMplsPathIndexOrZero 
This value denotes the configured path that was
chosen for this tunnel. This value reflects the
secondary index into mplsTunnelHopTable. This path
may not exactly match the one in
mplsTunnelARHopTable due to the fact that some CSPF
modification may have taken place. See
mplsTunnelARHopTable for the actual path being
taken by the tunnel. A value of zero denotes that
no path is currently in use or available.

Context

MIB
HP-SN-MPLS-TE-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.30
Type
column
Access
readwrite
Status
current
Parent
mplsTunnelEntry
Table
mplsTunnelTable
Siblings
36

Syntax

HP-SN-MPLS-TC-MIBMplsPathIndexOrZero
Source
HP-SN-MPLS-TC-MIBMplsPathIndexOrZero
Base type
Unsigned32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsTunnelIndex
Uniquely identifies this row.
columnHP-SN-MPLS-TC-MIBMplsTunnelIndex.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.1
mplsTunnelSignallingProto
The signaling protocol, if any, which was used to setup this tunnel.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.10
mplsTunnelSetupPrio
Indicates the setup priority of this tunnel.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.11
mplsTunnelHoldingPrio
Indicates the holding priority for this tunnel.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.12
mplsTunnelSessionAttributes
This bitmask indicates optional session values for this tunnel. The following describes these bitfields: fastRerouteThis flag indicates that the any tunnel hop may …
columnBits.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.13
mplsTunnelOwner
Indicates which protocol created and is responsible for managing this tunnel. Values rsvp(2) and crldp(3) should not be used at the head-end of a MPLS tunnel.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.14
mplsTunnelLocalProtectInUse
Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.15
mplsTunnelResourcePointer
This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the mplsTunnelResourceEntry to indicate which mplsT…
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.16
mplsTunnelInstancePriority
This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a se…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.17
mplsTunnelHopTableIndex
Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this tunnel.
columnHP-SN-MPLS-TC-MIBMplsPathIndexOrZero.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.18
mplsTunnelARHopTableIndex
Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel.
columnHP-SN-MPLS-TC-MIBMplsPathIndexOrZero.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.19
mplsTunnelInstance
Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels.
columnHP-SN-MPLS-TC-MIBMplsTunnelInstanceIndex.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.2
mplsTunnelCHopTableIndex
Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel.
columnHP-SN-MPLS-TC-MIBMplsPathIndexOrZero.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.20
mplsTunnelPrimaryInstance
Specifies the instance index of the primary instance of this tunnel.
columnHP-SN-MPLS-TC-MIBMplsTunnelInstanceIndex.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.21
mplsTunnelPrimaryTimeUp
Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in mplsTunnelPrimaryInstance.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.22
mplsTunnelPathChanges
Specifies the number of times the paths has changed for this tunnel.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.23
mplsTunnelLastPathChange
Specifies the time since the last path change for this tunnel.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.24
mplsTunnelCreationTime
Specifies the value of SysUpTime when the first instance of this tunnel came into existence.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.25
mplsTunnelStateTransitions
Specifies the number of times the state of this tunnel instance has changed.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.26
mplsTunnelIncludeAnyAffinity
A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common.
columnHP-SN-MPLS-TC-MIBMplsTunnelAffinity.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.27
mplsTunnelIncludeAllAffinity
A link satisfies the include-all constraint if and only if the link contains all of the adminstrative groups specified in the constraint.
columnHP-SN-MPLS-TC-MIBMplsTunnelAffinity.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.28
mplsTunnelExcludeAllAffinity
A link satisfies the exclude-all constraint if and only if the link contains none of the adminstrative groups specifie in the constraint.
columnHP-SN-MPLS-TC-MIBMplsTunnelAffinity.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.29
mplsTunnelIngressLSRId
The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value SHOULD mimic the Extended Tunnel Id field in…
columnHP-SN-MPLS-TC-MIBMplsLsrIdentifier.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.3
mplsTunnelRole
This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to trans…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.31
mplsTunnelTotalUpTime
This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.32
mplsTunnelInstanceUpTime
This value identifies the total time that this tunnel instance's operStatus has been Up(1).
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.33
mplsTunnelAdminStatus
Indicates the desired operational status of this tunnel.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.34
mplsTunnelOperStatus
Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.35
mplsTunnelRowStatus
This variable is used to create, modify, and/or delete a row in this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.36
mplsTunnelStorageType
This variable indicates the storage type for this object.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.37
mplsTunnelEgressLSRId
Specifies the egress LSR ID.
columnHP-SN-MPLS-TC-MIBMplsLsrIdentifier.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.4
mplsTunnelName
The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If mplsTunnelIsIf is set to true then the ifName of the interfa…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.5
mplsTunnelDescr
A textual string containing information about the tunnel. If there is no description this object contains a zero length string.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.6
mplsTunnelIsIf
Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interfac…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.7
mplsTunnelIfIndex
If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain …
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.8
mplsTunnelXCPointer
This variable points to a row in the mplsXCTable. This table identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of z…
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.9