mplsTunnelEgressLSRId
HP-SN-MPLS-TE-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.4
Object
column
HP-SN-MPLS-TC-MIBMplsLsrIdentifier
Specifies the egress LSR ID.
Context
- MIB
- HP-SN-MPLS-TE-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.4- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- mplsTunnelEntry
- Table
- mplsTunnelTable
- Siblings
- 36
Syntax
HP-SN-MPLS-TC-MIBMplsLsrIdentifier
- Source
- HP-SN-MPLS-TC-MIBMplsLsrIdentifier
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelIndex Uniquely identifies this row. | column | HP-SN-MPLS-TC-MIBMplsTunnelIndex | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.1 |
| mplsTunnelSignallingProto The signaling protocol, if any, which was used to
setup this tunnel. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.10 |
| mplsTunnelSetupPrio Indicates the setup priority of this tunnel. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.11 |
| mplsTunnelHoldingPrio Indicates the holding priority for this tunnel. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.12 |
| mplsTunnelSessionAttributes This bitmask indicates optional session values for
this tunnel. The following describes these
bitfields:
fastRerouteThis flag indicates that the any tunnel
hop may … | column | Bits | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.13 |
| mplsTunnelOwner Indicates which protocol created and is responsible
for managing this tunnel. Values rsvp(2) and
crldp(3) should not be used at the head-end of a
MPLS tunnel. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.14 |
| mplsTunnelLocalProtectInUse Indicates that the local repair mechanism is in use
to maintain this tunnel (usually in the face of an
outage of the link it was previously routed over). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.15 |
| mplsTunnelResourcePointer This variable represents a pointer to the traffic
parameter specification for this tunnel. This
value may point at an entry in the
mplsTunnelResourceEntry to indicate which
mplsT… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.16 |
| mplsTunnelInstancePriority This value indicates which priority, in descending
order, with 0 indicating the lowest priority,
within a group of tunnel instances. A group of
tunnel instances is defined as a se… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.17 |
| mplsTunnelHopTableIndex Index into the mplsTunnelHopTable entry that
specifies the explicit route hops for this tunnel. | column | HP-SN-MPLS-TC-MIBMplsPathIndexOrZero | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.18 |
| mplsTunnelARHopTableIndex Index into the mplsTunnelARHopTable entry that
specifies the actual hops traversed by the tunnel. | column | HP-SN-MPLS-TC-MIBMplsPathIndexOrZero | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.19 |
| mplsTunnelInstance Uniquely identifies an instance of a tunnel. It is
useful to identify multiple instances of tunnels
for the purposes of backup and parallel tunnels. | column | HP-SN-MPLS-TC-MIBMplsTunnelInstanceIndex | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.2 |
| mplsTunnelCHopTableIndex Index into the mplsTunnelCHopTable entry that
specifies the computed hops traversed by the
tunnel. | column | HP-SN-MPLS-TC-MIBMplsPathIndexOrZero | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.20 |
| mplsTunnelPrimaryInstance Specifies the instance index of the primary instance
of this tunnel. | column | HP-SN-MPLS-TC-MIBMplsTunnelInstanceIndex | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.21 |
| mplsTunnelPrimaryTimeUp Specifies the total time the primary instance of
this tunnel has been active. The primary instance
of this tunnel is defined in
mplsTunnelPrimaryInstance. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.22 |
| mplsTunnelPathChanges Specifies the number of times the paths has changed
for this tunnel. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.23 |
| mplsTunnelLastPathChange Specifies the time since the last path change for
this tunnel. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.24 |
| mplsTunnelCreationTime Specifies the value of SysUpTime when the first
instance of this tunnel came into existence. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.25 |
| mplsTunnelStateTransitions Specifies the number of times the state of this
tunnel instance has changed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.26 |
| mplsTunnelIncludeAnyAffinity A link satisfies the include-any constraint if and
only if the constraint is zero, or the link and the
constraint have a resource class in common. | column | HP-SN-MPLS-TC-MIBMplsTunnelAffinity | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.27 |
| mplsTunnelIncludeAllAffinity A link satisfies the include-all constraint if and
only if the link contains all of the adminstrative
groups specified in the constraint. | column | HP-SN-MPLS-TC-MIBMplsTunnelAffinity | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.28 |
| mplsTunnelExcludeAllAffinity A link satisfies the exclude-all constraint if and
only if the link contains none of the adminstrative
groups specifie in the constraint. | column | HP-SN-MPLS-TC-MIBMplsTunnelAffinity | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.29 |
| mplsTunnelIngressLSRId The purpose of this object is to uniquely identity a
tunnel within a network. When the MPLS signalling
protoocol is rsvp(2) this value SHOULD mimic the
Extended Tunnel Id field in… | column | HP-SN-MPLS-TC-MIBMplsLsrIdentifier | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.3 |
| mplsTunnelPathInUse This value denotes the configured path that was
chosen for this tunnel. This value reflects the
secondary index into mplsTunnelHopTable. This path
may not exactly match the one in… | column | HP-SN-MPLS-TC-MIBMplsPathIndexOrZero | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.30 |
| mplsTunnelRole This value signifies the role that this tunnel
entry/instance represents. This value MUST be set
to head(1) at the originating point of the tunnel.
This value MUST be set to trans… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.31 |
| mplsTunnelTotalUpTime This value represents the aggregate up time for all
instances of this tunnel, if available. If this
value is unavailable, it MUST return a value of 0. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.32 |
| mplsTunnelInstanceUpTime This value identifies the total time that this
tunnel instance's operStatus has been Up(1). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.33 |
| mplsTunnelAdminStatus Indicates the desired operational status of this
tunnel. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.34 |
| mplsTunnelOperStatus Indicates the actual operational status of this
tunnel, which is typically but not limited to, a
function of the state of individual segments of
this tunnel. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.35 |
| mplsTunnelRowStatus This variable is used to create, modify, and/or
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.36 |
| mplsTunnelStorageType This variable indicates the storage type for this
object. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.37 |
| mplsTunnelName The canonical name assigned to the tunnel. This name
can be used to refer to the tunnel on the LSR's
console port. If mplsTunnelIsIf is set to true
then the ifName of the interfa… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.5 |
| mplsTunnelDescr A textual string containing information about the
tunnel. If there is no description this object
contains a zero length string. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.6 |
| mplsTunnelIsIf Denotes whether or not this tunnel corresponds to an
interface represented in the interfaces group
table. Note that if this variable is set to true
then the ifName of the interfac… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.7 |
| mplsTunnelIfIndex If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise
this variable should contain … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.8 |
| mplsTunnelXCPointer This variable points to a row in the mplsXCTable.
This table identifies the segments that compose
this tunnel, their characteristics, and
relationships to each other. A value of z… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.9 |