mplsTunnelCHopType
HP-SN-MPLS-TE-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.10
Object
column
Enumeration
Denotes whether this is tunnel hop is routed in a strict or loose fashion.
Context
- MIB
- HP-SN-MPLS-TE-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mplsTunnelCHopEntry
- Table
- mplsTunnelCHopTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | strict |
2 | loose |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelCHopListIndex Primary index into this table identifying a
particular computed hop list. | column | HP-SN-MPLS-TC-MIBMplsPathIndex | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.1 |
| mplsTunnelCHopIndex Secondary index into this table identifying the
particular hop. | column | HP-SN-MPLS-TC-MIBMplsPathIndex | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.2 |
| mplsTunnelCHopAddrType Denotes the address type of this tunnel hop. Note
that lspId(4) is a valid option only for tunnels
signaled via CRLDP. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.3 |
| mplsTunnelCHopIpv4Addr If mplsTunnelCHopAddrType is set to ipV4(1), then
this value will contain the IPv4 address of this
hop. This object is otherwise insignificant and
should contain a value of 0. | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.4 |
| mplsTunnelCHopIpv4PrefixLen If mplsTunnelCHopAddrType is ipV4(1), then the
prefix length for this hop's IPv4 address is
contained herein. This object is otherwise
insignificant and should contain a value of … | column | Unsigned32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.5 |
| mplsTunnelCHopIpv6Addr If the mplsTunnelCHopAddrType is set to ipV6(2),
then this variable contains the IPv6 address of
this hop. This object is otherwise insignificant
and should contain a value of 0. | column | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.6 |
| mplsTunnelCHopIpv6PrefixLen If mplsTunnelCHopAddrType is set to ipV6(2), this
value will contain the prefix length for this hop's
IPv6 address. This object is otherwise
insignificant and should contain a val… | column | Unsigned32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.7 |
| mplsTunnelCHopAsNumber If mplsTunnelCHopAddrType is set to asNumber(3),
then this value will contain the AS number of this
hop. This object is otherwise insignificant and
should contain a value of 0 to … | column | Unsigned32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.8 |
| mplsTunnelCHopLspId If mplsTunnelCHopAddrType is set to lspid(4), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indica… | column | HP-SN-MPLS-TC-MIBMplsLSPID | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.9 |