mplsTunnelCHopLspId

HP-SN-MPLS-TE-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.9
MIB view Table view

Object

column HP-SN-MPLS-TC-MIBMplsLSPID 
If mplsTunnelCHopAddrType is set to lspid(4), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.

Context

MIB
HP-SN-MPLS-TE-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.9
Type
column
Access
readonly
Status
current
Parent
mplsTunnelCHopEntry
Table
mplsTunnelCHopTable
Siblings
9

Syntax

HP-SN-MPLS-TC-MIBMplsLSPID
Source
HP-SN-MPLS-TC-MIBMplsLSPID
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..31

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsTunnelCHopListIndex
Primary index into this table identifying a particular computed hop list.
columnHP-SN-MPLS-TC-MIBMplsPathIndex.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.1
mplsTunnelCHopType
Denotes whether this is tunnel hop is routed in a strict or loose fashion.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.10
mplsTunnelCHopIndex
Secondary index into this table identifying the particular hop.
columnHP-SN-MPLS-TC-MIBMplsPathIndex.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.2
mplsTunnelCHopAddrType
Denotes the address type of this tunnel hop. Note that lspId(4) is a valid option only for tunnels signaled via CRLDP.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.3
mplsTunnelCHopIpv4Addr
If mplsTunnelCHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0.
columnINET-ADDRESS-MIBInetAddressIPv4.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.4
mplsTunnelCHopIpv4PrefixLen
If mplsTunnelCHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of …
columnUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.5
mplsTunnelCHopIpv6Addr
If the mplsTunnelCHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0.
columnINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.6
mplsTunnelCHopIpv6PrefixLen
If mplsTunnelCHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a val…
columnUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.7
mplsTunnelCHopAsNumber
If mplsTunnelCHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to …
columnUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.8