snVrrpVirRtr2TrackPortList

HP-SN-IP-VRRP-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25
MIB view Table view

Object

column mandatory r/w OctetString 
This object specifies the identity of the physical port and virtual ports
whose state is to be monitored.  Each port index is 
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below. 
Encoding and decoding scheme is range based:
Each range prefix with 0000 (2 octets) where 0000 is not valid 
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
Ex:
port list: 0001..0005 0015 0032..0047
Port list in PDU:  0000 0001 0005 000f 0000 0020 002f.
If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of 
Preference Level parameter when the Track Port states first
changes from UP to DOWN.  When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP and VRRP-E physical track port membership.

Context

MIB
HP-SN-IP-VRRP-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25
Type
column
Access
readwrite
Status
mandatory
Parent
snVrrpVirRtr2Entry
Table
snVrrpVirRtr2Table
Siblings
28

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snVrrpVirRtr2Id mandatory
One of the virtual router ID of this Vrrp and Vrrpe interface.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.1
snVrrpVirRtr2IpAddrMask mandatory
The numbers of IP Addresses of this virtual router of this interface.
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.10
snVrrpVirRtr2Activate mandatory
This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe Routers.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.11
snVrrpVirRtr2BackupInt mandatory
Time interval between backup routers hello message advertisements (seconds).
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.12
snVrrpVirRtr2RowStatus mandatory
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.13
snVrrpVirRtr2RxArpPktDropCnts mandatory
The received Vrrp and Vrrpe ARP Packet Drop Counts.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.14
snVrrpVirRtr2RxIpPktDropCnts mandatory
The received Vrrp and Vrrpe IP Packet Drop Counts.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.15
snVrrpVirRtr2RxPortMismatchCnts mandatory
The received Vrrp and Vrrpe Port mismatching Counts.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.16
snVrrpVirRtr2RxNumOfIpMismatchCnts mandatory
The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.17
snVrrpVirRtr2RxIpMismatchCnts mandatory
The received Vrrp and Vrrpe IP Address mismatching Counts.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.18
snVrrpVirRtr2RxHelloIntMismatchCnts mandatory
The counts of the virtual router interface with hello interval mismatch counts.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.19
snVrrpVirRtr2Ownership mandatory
The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp ro…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.2
snVrrpVirRtr2RxPriorityZeroFromMasterCnts mandatory
The counts of the virtual router interface with Priority zero from the master.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.20
snVrrpVirRtr2RxHigherPriorityCnts mandatory
The counts of the virtual router interface with higher Priority.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.21
snVrrpVirRtr2TransToMasterStateCnts mandatory
The counts of the virtual router interface transition to master state.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.22
snVrrpVirRtr2TransToBackupStateCnts mandatory
The counts of the virtual router interface transition to backup state.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.23
snVrrpVirRtr2CurrDeadInt mandatory
Current Dead interval (in 100 milliseconds).
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.24
snVrrpVirRtr2AdvertiseBackup mandatory
Set Advertise this backup router to master
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.26
snVrrpVirRtr2MasterIpAddr mandatory
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.27
snVrrpVirRtr2IpAddrCount mandatory
The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/…
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.28
snVrrpVirRtr2VirtualMacAddr mandatory
The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obtainable by a manageme…
columnMacAddress.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.29
snVrrpVirRtr2CfgPriority mandatory
This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not s…
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.3
snVrrpVirRtr2TrackPriority mandatory
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track …
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.4
snVrrpVirRtr2CurrPriority mandatory
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.5
snVrrpVirRtr2HelloInt mandatory
Time interval between advertisements (seconds).
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6
snVrrpVirRtr2DeadInt mandatory
Dead interval (seconds).
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.7
snVrrpVirRtr2PreemptMode mandatory
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.8
snVrrpVirRtr2State mandatory
This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.9