snVrrpVirRtr2HelloInt
HP-SN-IP-VRRP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6
Object
column
mandatory
r/w
Integer32
Time interval between advertisements (seconds).
Context
- MIB
- HP-SN-IP-VRRP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- snVrrpVirRtr2Entry
- Table
- snVrrpVirRtr2Table
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-84
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snVrrpVirRtr2Id mandatory One of the virtual router ID of this Vrrp and Vrrpe interface. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.1 |
| snVrrpVirRtr2IpAddrMask mandatory The numbers of IP Addresses of this virtual router of this interface. | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.10 |
| snVrrpVirRtr2Activate mandatory This object specifies the Vrrp Router's activate command as:
disabled(0)...deactivate this Vrrp and Vrrpe Routers.
enabled(1)....activate this Vrrp and Vrrpe Routers. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.11 |
| snVrrpVirRtr2BackupInt mandatory Time interval between backup routers hello message advertisements (seconds). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.12 |
| snVrrpVirRtr2RowStatus mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.13 |
| snVrrpVirRtr2RxArpPktDropCnts mandatory The received Vrrp and Vrrpe ARP Packet Drop Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.14 |
| snVrrpVirRtr2RxIpPktDropCnts mandatory The received Vrrp and Vrrpe IP Packet Drop Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.15 |
| snVrrpVirRtr2RxPortMismatchCnts mandatory The received Vrrp and Vrrpe Port mismatching Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.16 |
| snVrrpVirRtr2RxNumOfIpMismatchCnts mandatory The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.17 |
| snVrrpVirRtr2RxIpMismatchCnts mandatory The received Vrrp and Vrrpe IP Address mismatching Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.18 |
| snVrrpVirRtr2RxHelloIntMismatchCnts mandatory The counts of the virtual router interface with hello interval mismatch counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.19 |
| snVrrpVirRtr2Ownership mandatory The ownership of this Vrrp router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this Vrrp ro… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.2 |
| snVrrpVirRtr2RxPriorityZeroFromMasterCnts mandatory The counts of the virtual router interface with Priority zero from the master. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.20 |
| snVrrpVirRtr2RxHigherPriorityCnts mandatory The counts of the virtual router interface with higher Priority. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.21 |
| snVrrpVirRtr2TransToMasterStateCnts mandatory The counts of the virtual router interface transition to master state. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.22 |
| snVrrpVirRtr2TransToBackupStateCnts mandatory The counts of the virtual router interface transition to backup state. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.23 |
| snVrrpVirRtr2CurrDeadInt mandatory Current Dead interval (in 100 milliseconds). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.24 |
| snVrrpVirRtr2TrackPortList mandatory This object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifInd… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25 |
| snVrrpVirRtr2AdvertiseBackup mandatory Set Advertise this backup router to master | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.26 |
| snVrrpVirRtr2MasterIpAddr mandatory The master router's real/virtual (primary) IP address. This is
the IP address listed as the source in VRRP and VRRPE advertisement
last received by this virtual router. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.27 |
| snVrrpVirRtr2IpAddrCount mandatory The number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.28 |
| snVrrpVirRtr2VirtualMacAddr mandatory The virtual MAC address of the virtual router. Although this
object can be derived from the 'snVrrpVirRtr2VrId' object, it is
defined so that it is easily obtainable by a manageme… | column | MacAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.29 |
| snVrrpVirRtr2CfgPriority mandatory This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not s… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.3 |
| snVrrpVirRtr2TrackPriority mandatory The higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtr2CurrPriority
of this interface will be adjusted dynamically with this
track … | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.4 |
| snVrrpVirRtr2CurrPriority mandatory The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.5 |
| snVrrpVirRtr2DeadInt mandatory Dead interval (seconds). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.7 |
| snVrrpVirRtr2PreemptMode mandatory This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.8 |
| snVrrpVirRtr2State mandatory This object specifies the Vrrp and vrrpe Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.9 |