hpicfUsrProfileStatsTaggedEgressVlanMap2k
HP-ICF-USER-PROFILE-MIB ·
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.3
Object
column
OctetString
A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 1024 through 2047.
The first octet corresponds to VLANs with 'VlanIndex'
values of 1024 through 1031, the second octet to VLANs
1032 through 1039, etc. The most significant bit of
each octet corresponds to the lowest 'VlanIndex' value
in that octet.
When a bit is set to '1', it indicates the
corresponding tagged VLAN as active for this user.
Context
- MIB
- HP-ICF-USER-PROFILE-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpicfUsrProfileStatsEntry
- Table
- hpicfUsrProfileStatsTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfUsrProfileStatsPvid Active port VID (PVID) for this user. | column | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.1 |
| hpicfUsrProfileStatsFilterListIndex A value of 0 indicates that no filter rule set is
active for the user.
A value between 1 and 16384 selects the active filter
rule set from 'hpicfUsrProfileStatsFilterTable'. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.10 |
| hpicfUsrProfileStatsAccessMode Indicates whether profile was applied via SNMP
or via RADIUS. Application by SNMP has precedence
over RADIUS. Where there are no attribute conflicts,
profile attributes may be a … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.11 |
| hpicfUsrProfilePortSpeedOverRidden When this attribute is TRUE it signifies
the 'hpicfUsrProfileStatsPortSpeedVSA'
is a RADIUS over-ridden. A FALSE value
signifies it is not RADIUS over-ridden value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.12 |
| hpicfUsrProfileStatsPortSpeedVSA This attribute signifies at what speed
the port is operating at. | column | CONFIG-MIBHpicfUsrProfilePortSpeed | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.13 |
| hpicfUsrProfileStatsTaggedEgressVlanMap1k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 0 through 1023.
The first octet corresponds to VLANs with 'VlanIndex'
values… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.2 |
| hpicfUsrProfileStatsTaggedEgressVlanMap3k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 2048 through 3071.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.4 |
| hpicfUsrProfileStatsTaggedEgressVlanMap4k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 3072 through 4095.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.5 |
| hpicfUsrProfileStatsIngressVlanFilterEnable When this attribute is TRUE causes the system is only
allowing ingress traffic from those VLANs on which
egress traffic is permitted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.6 |
| hpicfUsrProfileStatsPriorityRegenTable Specifies the IEEE 802 priority regeneration table
active for this access profile. Syntax of octet string
is same as for 'User-Priority-Table' RADIUS attribute
as defined in RFC… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.7 |
| hpicfUsrProfileStatsMaxIngressBandwidth Specifies the maximum ingress bandwidth for this
access profile. Bandwidth value is specified in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.8 |
| hpicfUsrProfileStatsMaxEgressBandwidth Specifies the maximum egress bandwidth for this
access profile. Bandwidth value is specified in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.9 |