hpicfUsrProfileStatsMaxEgressBandwidth
HP-ICF-USER-PROFILE-MIB ·
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.9
Object
column
SNMPv2-SMIUnsigned32
Specifies the maximum egress bandwidth for this access profile. Bandwidth value is specified in Kbps.
Context
- MIB
- HP-ICF-USER-PROFILE-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpicfUsrProfileStatsEntry
- Table
- hpicfUsrProfileStatsTable
- Siblings
- 12
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfUsrProfileStatsPvid Active port VID (PVID) for this user. | column | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.1 |
| hpicfUsrProfileStatsFilterListIndex A value of 0 indicates that no filter rule set is
active for the user.
A value between 1 and 16384 selects the active filter
rule set from 'hpicfUsrProfileStatsFilterTable'. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.10 |
| hpicfUsrProfileStatsAccessMode Indicates whether profile was applied via SNMP
or via RADIUS. Application by SNMP has precedence
over RADIUS. Where there are no attribute conflicts,
profile attributes may be a … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.11 |
| hpicfUsrProfilePortSpeedOverRidden When this attribute is TRUE it signifies
the 'hpicfUsrProfileStatsPortSpeedVSA'
is a RADIUS over-ridden. A FALSE value
signifies it is not RADIUS over-ridden value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.12 |
| hpicfUsrProfileStatsPortSpeedVSA This attribute signifies at what speed
the port is operating at. | column | CONFIG-MIBHpicfUsrProfilePortSpeed | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.13 |
| hpicfUsrProfileStatsTaggedEgressVlanMap1k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 0 through 1023.
The first octet corresponds to VLANs with 'VlanIndex'
values… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.2 |
| hpicfUsrProfileStatsTaggedEgressVlanMap2k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 1024 through 2047.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.3 |
| hpicfUsrProfileStatsTaggedEgressVlanMap3k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 2048 through 3071.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.4 |
| hpicfUsrProfileStatsTaggedEgressVlanMap4k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 3072 through 4095.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.5 |
| hpicfUsrProfileStatsIngressVlanFilterEnable When this attribute is TRUE causes the system is only
allowing ingress traffic from those VLANs on which
egress traffic is permitted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.6 |
| hpicfUsrProfileStatsPriorityRegenTable Specifies the IEEE 802 priority regeneration table
active for this access profile. Syntax of octet string
is same as for 'User-Priority-Table' RADIUS attribute
as defined in RFC… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.7 |
| hpicfUsrProfileStatsMaxIngressBandwidth Specifies the maximum ingress bandwidth for this
access profile. Bandwidth value is specified in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.8 |