hpicfSyslogControlSmmLog
HP-ICF-SYSLOG-MIB ·
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.7
Object
column
r/w
Enumeration
This object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from the standby management module(SMM) will be sent to the Syslog server. If the value is disabled, the log messages from the standby management module will not be sent to the Syslog server. By default, this is disabled.
Context
- MIB
- HP-ICF-SYSLOG-MIB
- OID
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfSyslogControlEntry
- Table
- hpicfSyslogControlTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfSyslogControlIndex The Index that uniquely identifies the Syslog
application in the hpicfSyslogControlTable.
The value of the index for a Syslog application
may not be the same across system reboo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.1 |
| hpicfSyslogControlFilterName The filter Name connected to the Syslog server. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.10 |
| hpicfSyslogControlDescr A user definable description of the Syslog application.
This description could be used by Syslog management
applications e.g. in reports or in user interfaces.
For the description… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.2 |
| hpicfSyslogControlBindAddrType The type of Internet address which follows
in hpicfSyslogControlBindAddr.
Currently only IPv4 is supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.3 |
| hpicfSyslogControlBindAddr The specific address the Syslog sender will bind to.
The format of the address is specified by the
corresponding hpicfSyslogControlBindAddrType object. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.4 |
| hpicfSyslogControlRowStatus This object is used to create, modify and delete rows in
the hpicfSyslogControlTable.
The value of hpicfSyslogControlDescr can be changed
when this object is in state ''active'' o… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.5 |
| hpicfSyslogControlBindAddrIsOobm This object indicates the specific address to which
Syslog sender will bind is on OOBM interface. This
mib object will be applicable only if there is a
physical OOBM port on the d… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.6 |
| hpicfSyslogControlTransportProtocol The transport protocol used for the connection to the Syslog server
associated with this row. The default value is UDP. | column | Enumeration | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.8 |
| hpicfSyslogControlDestinationPort The socket port used by the transport protocol to connect to the
Syslog server associated with this row. The default Syslog port
for UDP is 514, for TCP is 1470, and for TLS is… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.9 |