hpicfSyslogControlRowStatus
HP-ICF-SYSLOG-MIB ·
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.5
Object
This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'.
Context
- MIB
- HP-ICF-SYSLOG-MIB
- OID
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfSyslogControlEntry
- Table
- hpicfSyslogControlTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfSyslogControlIndex The Index that uniquely identifies the Syslog
application in the hpicfSyslogControlTable.
The value of the index for a Syslog application
may not be the same across system reboo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.1 |
| hpicfSyslogControlFilterName The filter Name connected to the Syslog server. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.10 |
| hpicfSyslogControlDescr A user definable description of the Syslog application.
This description could be used by Syslog management
applications e.g. in reports or in user interfaces.
For the description… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.2 |
| hpicfSyslogControlBindAddrType The type of Internet address which follows
in hpicfSyslogControlBindAddr.
Currently only IPv4 is supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.3 |
| hpicfSyslogControlBindAddr The specific address the Syslog sender will bind to.
The format of the address is specified by the
corresponding hpicfSyslogControlBindAddrType object. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.4 |
| hpicfSyslogControlBindAddrIsOobm This object indicates the specific address to which
Syslog sender will bind is on OOBM interface. This
mib object will be applicable only if there is a
physical OOBM port on the d… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.6 |
| hpicfSyslogControlSmmLog This object is applicable for a device with a standby management
module like 8200zl. When the value of this object is set to
enabled, all the log messages from the standby manage… | column | Enumeration | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.7 |
| hpicfSyslogControlTransportProtocol The transport protocol used for the connection to the Syslog server
associated with this row. The default value is UDP. | column | Enumeration | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.8 |
| hpicfSyslogControlDestinationPort The socket port used by the transport protocol to connect to the
Syslog server associated with this row. The default Syslog port
for UDP is 514, for TCP is 1470, and for TLS is… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.11.2.14.14.1.1.1.1.9 |