hpicfPoePowerRedundancy
HP-ICF-POE-MIB ·
.1.3.6.1.4.1.11.2.14.11.1.9.1.4
Object
scalar
deprecated
r/w
Enumeration
This object is used to configure the POE power redundancy mode. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1). In a stack, this value pertains only to the commander switch.
Context
- MIB
- HP-ICF-POE-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.1.9.1.4- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- hpicfPoe
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | nPlus1 |
3 | full |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPoePethPsePortTable This table supplements the table 'pethPsePortTable'
in ieee802af.mib. | table | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.1 |
| hpicfPoeRemainingGuaranteedPower This field specifies the Remaining Guaranteed power.
This is difference of Guaranteed Maximum PoE Power and
the sum of maximum power of critical PSEs | scalar | watts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.1.9.1.10 |
| hpicfPoePethPsePowerTable This table supplements the table 'pethPsePortTable'
in ieee802af.mib. | table | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.11 |
| hpicfPoePethPseFourPairPortTable This table supplements the table 'pethPsePortTable'
in ieee802af.mib. | table | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.12 |
| hpicfPoeConformance | node | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.2 |
| hpicfPoeAllowPreStdDetect deprecated This object is used to configure the default
POE power detection mode.
A value of TRUE - indicates that power
pre-802.3af-standard devices.
A value of FALSE - indicates that only… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.9.1.3 |
| hpicfPoeExtPwrSupplyCount deprecated This object is used to configure the number
of external power supplies expected to
be connected to the chassis.
The default value is 1. In a stack, this
value pertains only to the… | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.1.9.1.5 |
| hpicfPseFeaturesTable This table describes the features of each power source
equipment (PSE). On standalone switches (both stackable
and chassis switches) there shall be only one entry in
this table. I… | table | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.6 |
| hpicfPoePowerSupplyTable This table contains one row per power supply available
to the switch. | table | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.7 |
| hpicfPoePethPseOperStateTable This table supplements the table 'pethPsePortTable'
in ieee802af.mib. | table | - | .1.3.6.1.4.1.11.2.14.11.1.9.1.8 |
| hpicfPoeMaxGuaranteedPower This field specifies the guaranteed maximum PoE power,
namely, the maximum power supplied to critical PSEs | scalar | watts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.1.9.1.9 |