hpicfPim6IfNegotiatedOverrideInterval
HP-ICF-PIM6 ·
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.20
Object
column
SNMPv2-SMITimeTicks
Negotiated PIMv6 Override Interval (ms).
Context
- MIB
- HP-ICF-PIM6
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpicfPim6IfEntry
- Table
- hpicfPim6IfTable
- Siblings
- 26
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPim6IfIndex The ifindex value of this PIMv6 interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.1 |
| hpicfPim6IfGenerationID Turns the Generation ID option ON and OFF, on this
interface. Default is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.10 |
| hpicfPim6IfJoinPruneHoldtime The value inserted into the Holdtime field of a PIMv6
Join/Prune message sent on this interface. A value of
65535 represents an 'infinite' holdtime. Implementations
are recom… | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.11 |
| hpicfPim6IfGraftRetryInterval The minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the PIMv6-DM… | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.12 |
| hpicfPim6IfMaxGraftRetries The maximum number of times this router will re-send a
Graft on this interface. Default is 2. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.13 |
| hpicfPim6IfSRTTLThreshold The Time To Live in a PIMv6-DM State Refresh message at
which it is not forwarded on this interface. Default is 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.14 |
| hpicfPim6IfLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.15 |
| hpicfPim6IfSRCapable Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.16 |
| hpicfPim6IfNBRTimeout Time interval after which the router will consider a
neighbor to not be present, if no PIM Hello messages
arrived on the interface. Default is 180 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.17 |
| hpicfPim6IfNBRCount PIMv6 Neighbor Count. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.18 |
| hpicfPim6IfNegotiatedPropagationDelay Negotiated PIMv6 LAN/Propagation Delay (ms). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.19 |
| hpicfPim6IfAddressType The address type of this PIMv6 interface. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.2 |
| hpicfPim6IfAssertHoldInterval PIMv6 Assert Hold Interval (s). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.21 |
| hpicfPim6IfNumRoutersNotUsingLanDelay Number of routers on network not using LAN Delay. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.22 |
| hpicfPim6IfHelloInterval The frequency at which PIMv6 Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM
specification. A v… | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.23 |
| hpicfPim6IfStatus The status of this entry. Creating the entry enables PIMv6
on the interface; destroying the entry disables PIMv6 on the
interface.
This status object can be set to… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.24 |
| hpicfPim6IfDRPriority The Designated Router Priority inserted into the DR
priority option on this interface. Default is 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.25 |
| hpicfPim6IfDRType The address type of Designated Router on this PIM interface. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.26 |
| hpicfPim6IfDR The primary IP address of the Designated Router on this PIM
interface. The InetAddressType is given by the
hpicfPim6InterfaceAddressType object. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.27 |
| hpicfPim6IfAddress The primary IP address of this router on this PIMv6
interface. The InetAddressType is given by the
pimInterfaceAddressType object. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.3 |
| hpicfPim6IfMode The configured mode of this PIMv6 interface. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.4 |
| hpicfPim6IfTrigHelloInterval The maximum time before this router sends a triggered
PIMv6 Hello message on this interface. This object
corresponds to the 'Trigered_Hello_Delay' timer value
defined in the P… | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.5 |
| hpicfPim6IfHelloHoldtime The value set in the Holdtime field of PIMv6 Hello
messages transmitted on this interface. A value of
65535 represents an 'infinite' holdtime. Implementations
are recommended… | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.6 |
| hpicfPim6IfLanPruneDelay Turns the LAN Prune Delay options ON and OFF, on this
interface. Default is true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.7 |
| hpicfPim6IfPropagationDelay The expected propagation delay between PIMv6 routers on
this network or link.This router inserts this value into
the Propagation_Delay messages sent on this interface.
Implem… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.8 |
| hpicfPim6IfOverrideInterval The value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIMv6 Hello
messages it sends on this interface.
When overriding a prune,… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.9 |