hpicfPim6IfGraftRetryInterval

HP-ICF-PIM6 · .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.12
MIB view Table view

Object

column r/w seconds Unsigned32 
The minimum interval that must transpire between two 
successive Grafts sent by a router.  This object corresponds 
to the 'Graft_Retry_Period' timer value defined in the PIMv6-DM 
specification.  This object is used only by PIMv6-DM.

Context

MIB
HP-ICF-PIM6
OID
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.12
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
hpicfPim6IfEntry
Table
hpicfPim6IfTable
Siblings
26

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints
range: 1-10

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfPim6IfIndex
The ifindex value of this PIMv6 interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.1
hpicfPim6IfGenerationID
Turns the Generation ID option ON and OFF, on this interface. Default is false.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.10
hpicfPim6IfJoinPruneHoldtime
The value inserted into the Holdtime field of a PIMv6 Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recom…
columnseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.11
hpicfPim6IfMaxGraftRetries
The maximum number of times this router will re-send a Graft on this interface. Default is 2.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.13
hpicfPim6IfSRTTLThreshold
The Time To Live in a PIMv6-DM State Refresh message at which it is not forwarded on this interface. Default is 0.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.14
hpicfPim6IfLanDelayEnabled
Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.15
hpicfPim6IfSRCapable
Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.16
hpicfPim6IfNBRTimeout
Time interval after which the router will consider a neighbor to not be present, if no PIM Hello messages arrived on the interface. Default is 180 seconds.
columnseconds Integer32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.17
hpicfPim6IfNBRCount
PIMv6 Neighbor Count.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.18
hpicfPim6IfNegotiatedPropagationDelay
Negotiated PIMv6 LAN/Propagation Delay (ms).
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.19
hpicfPim6IfAddressType
The address type of this PIMv6 interface.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.2
hpicfPim6IfNegotiatedOverrideInterval
Negotiated PIMv6 Override Interval (ms).
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.20
hpicfPim6IfAssertHoldInterval
PIMv6 Assert Hold Interval (s).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.21
hpicfPim6IfNumRoutersNotUsingLanDelay
Number of routers on network not using LAN Delay.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.22
hpicfPim6IfHelloInterval
The frequency at which PIMv6 Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A v…
columnseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.23
hpicfPim6IfStatus
The status of this entry. Creating the entry enables PIMv6 on the interface; destroying the entry disables PIMv6 on the interface. This status object can be set to…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.24
hpicfPim6IfDRPriority
The Designated Router Priority inserted into the DR priority option on this interface. Default is 1.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.25
hpicfPim6IfDRType
The address type of Designated Router on this PIM interface.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.26
hpicfPim6IfDR
The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the hpicfPim6InterfaceAddressType object.
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.27
hpicfPim6IfAddress
The primary IP address of this router on this PIMv6 interface. The InetAddressType is given by the pimInterfaceAddressType object.
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.3
hpicfPim6IfMode
The configured mode of this PIMv6 interface.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.4
hpicfPim6IfTrigHelloInterval
The maximum time before this router sends a triggered PIMv6 Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the P…
columnseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.5
hpicfPim6IfHelloHoldtime
The value set in the Holdtime field of PIMv6 Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended…
columnseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.6
hpicfPim6IfLanPruneDelay
Turns the LAN Prune Delay options ON and OFF, on this interface. Default is true.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.7
hpicfPim6IfPropagationDelay
The expected propagation delay between PIMv6 routers on this network or link.This router inserts this value into the Propagation_Delay messages sent on this interface. Implem…
columnmilliseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.8
hpicfPim6IfOverrideInterval
The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIMv6 Hello messages it sends on this interface. When overriding a prune,…
columnmilliseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.9