hpicfIpStaticRouteDistance
HP-ICF-IP-ROUTING ·
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.8
Object
column
r/w
Integer32
The administrative distance to associate with this static route. Routes with lower distances are preferred. By default, static routes are created with an administrative distance of 1, meaning they are preferred over all routes except directly connected routes. Setting a higher administrative distance for a route can be used for the following reasons: - by configuring multiple static routes to the same destination, one with the default distance and one with a higher distance, one can configure backup static routes - by configuring a static route with an administrative distance higher than the distance for a particular dynamic routing protocol, one can allow a static route to be overridden by dynamic routing information. Routes with an administrative distance of 255 will never be entered in the routing table.
Context
- MIB
- HP-ICF-IP-ROUTING
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfIpStaticRouteEntry
- Table
- hpicfIpStaticRouteTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfIpStaticRoutePrefixType The type of destination prefix specified by this
route. The value 'dns(16)' is not supported.
This object specifies the type of destination
address prefix in the hpicfIpStaticRou… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.1 |
| hpicfIpStaticRouteStatus Status of this route entry. All writable
columns in this table can be modified while the
corresponding row is active. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.10 |
| hpicfIpStaticRouteMetric Metric value for this route. It is used to compare
static route with other static routes to the same
destination. The acceptable range is from 1 to 255,
both inclusive. | column | OSPF-MIBMetric | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.11 |
| hpicfIpStaticRouteName Name of the configured static route.
It is used for lucidity and troubleshooting
purpose and is optional. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.12 |
| hpicfIpStaticRouteLogging This object determines whether or not debug log
messages are to be generated for packets matching
statically configured null routes.
When enabled, the debug option … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.13 |
| hpicfIpStaticRouteBfdEnable This object enables or disables BFD on Static route.
When set to true(1), BFD is enabled for the session.
When set to false(2), BFD is disabled for the session. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.14 |
| hpicfIpStaticRoutePrefix The destination address prefix of this route.
The type of address specified by this route is
indicated by the corresponding instance of the
hpicfIpStaticRoutePrefixType object.
… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.2 |
| hpicfIpStaticRoutePrefixLength This object indicates the number of leading
one bits which form the mask to be logically
ANDed with a destination address before
comparison with the corresponding instance of
the … | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.3 |
| hpicfIpStaticRouteFwdAddrType The type of forwarding address for this route.
The value of this object must be equal either to
'unknown' or to a value appropriate for the
corresponding instance of the
hpicfIpSt… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.4 |
| hpicfIpStaticRouteFwdAddr For remote routes, the value of the next specified
router to use for forwarding packets to the
destination specified by this route. Note that this
router does not need to be dire… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.5 |
| hpicfIpStaticRouteFwdIfIndex For remote routes, the value of this object must
be zero.
For reject or null routes, the value of this
object must be zero.
For local routes, this ob… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.6 |
| hpicfIpStaticRouteType The type of route. The value 'other' is not supported,
and is included only for compatibility with the IP
Forwarding Table MIB. The value 'local' indicates
that the destination … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.7 |
| hpicfIpStaticRouteTag Tag value that can be used to filter redistribution
of this route via route maps. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.9 |