hpicfGppcv2NpSubType

HP-ICF-GPPCV2-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.3

Object

column r/w Enumeration

Subtype of the policy.
A subtype of 'aclStandard' indicates that the 
policy is a standard Access Control List. The policy 
is used to permit or deny packets based on source 
IPv4 address and subnet only.
              
A subtype of 'aclExtended' indicates that the 
policy is an extended Access Control List, an ACL 
that filters packets based on source IPv4 address 
and subnet, destination IPv4 address and subnet, and 
protocol amongst other packet information.
              
A subtype of 'aclConnectionRateFilter' 
indicates that the policy is a 
connection-rate-filter Access Control List, similar
to an ACL-extended.
              
A subtype of 'aclIdm' indicates that the policy is
a Identity Driven Management ACL used to filter 
traffic based on the source MAC address, protocol 
and destination IP information of a packet.
              
A subtype of 'aclExtendedIpv6' indicates that the 
policy is an extended Access Control List, an ACL 
that filters packets based on source IPv6 address 
and subnet, destination IPv6 address and subnet, and 
protocol amongst other packet information.
              
A subype of 'policyQos' indicates that the 
policy will perform Quality of Service actions on 
packets that match statements in the policy's 
classes.
              
A subtype of 'policyMirror' indicates that 
the policy will perform mirror actions on packets 
that match statements in the policy's classes.
              
A subtype of 'policyPbr' indicates that the 
policy will perform Policy Based Routing actions 
on packets that match statements in the policy's 
classes.
                 
A subtype of 'policyIpsec' indicates that the
policy will perform IPsec actions on the packets
that match statements in the policy's classes.
              
A subtype of 'aclMacStandard' indicates that the
policy is a standard MAC ACL.  This ACL filters
packets based on the source MAC address.
              
A subtype of 'aclMacExtended' indicates that the
policy is an extended MAC ACL.  This ACL filters
packets based on source MAC address, destination
MAC address, ethertype, CoS and VLAN.
              
A subtype of 'policyUser' indicates that the
policy will perform per user actions on packets
that match statements in the policy's classes.

Context

MIB: HP-ICF-GPPCV2-MIB
OID: .1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.3
Type: column
Access: readwrite
Status: current
Parent: hpicfGppcv2NamedPolicyEntry
Table: hpicfGppcv2NamedPolicyTable
Siblings: 8

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	subtypeNone
`2`	aclStandard
`3`	aclExtended
`4`	aclConnectionRateFilter
`5`	aclIdm
`6`	aclExtendedIpv6
`7`	policyQos
`8`	policyMirror
`9`	policyPbr
`10`	policyIpsec
`11`	aclMacStandard
`12`	aclMacExtended
`13`	policyUser

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hpicfGppcv2NpPolicyName Name of the policy. The name of a policy is its unique identification. It is a printable string in ASCII characters. It can be up to 64 characters in length and is case sensiti…	column	HpicfGppcv2PolicyName	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.1`
hpicfGppcv2NpPolicyType Type of the policy as defined in the TEXTUAL-CONVENTION.	column	HpicfGppcv2PolicyType	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.2`
hpicfGppcv2NpReseqStart Specifies the starting sequence number for resequence.	column	Integer32	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.4`
hpicfGppcv2NpReseqIncr Specifies the increment value for resequence.	column	Integer32	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.5`
hpicfGppcv2NpLastSeqNo Contains the highest valid sequence number for this policy entry at any point of time.	column	Integer32	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.6`
hpicfGppcv2NpLastErrorCode Error code of the last error that occurred. A non-zero value indicates that the last operation performed on the ruleEntry of this policy did not succeed. A detailed description …	column	HpicfGppcv2LastErrorCode	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.7`
hpicfGppcv2NpLastErrorString Description of the last error that occurred. This is a printable ASCII string that describes the error in some detail.	column	OctetString	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.8`
hpicfGppcv2NpRowStatus Status of this row. The named policy must be active before rules can be added to it or removed from it. A newly created policy will remain in notReady state until it is given a …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.9`