hpicfDSnoopV6DatabaseWriteTimeout

HP-ICF-DHCPv6-SNOOP-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.5
MIB view Table view

Object

scalar r/w seconds Unsigned32 
The number of seconds to wait for the database file transfer
to finish. If file transfer is not over within this period,
a file transfer failure message is displayed. To continue trying
indefinitely, specify a value of 0.
The default value is 300 seconds.

Context

MIB
HP-ICF-DHCPv6-SNOOP-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.5
Type
scalar
Access
readwrite
Status
current
Units
seconds
Parent
hpicfDSnoopV6GlobalCfg
Siblings
11

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints
range: 0-86400

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfDSnoopV6Enable
This object provides the administrative status of the DHCPv6 Snooping feature. This status must be enabled for DHCPv6 snooping to work.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.1
hpicfDSnoopV6DatabaseSFTPPassword
A location to store the Password of the SFTP Server.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.10
hpicfDSnoopV6DatabaseValidateSFTPServer
This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.11
hpicfDSnoopV6RateLimit
This object sets the DHCPV6 packet transfer rate. This rate limit is applicable only when DHCPV6 snooping is enabled. The default rate is 100 packets per sec.
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.12
hpicfDSnoopV6VlanEnable
This object contains vid map for vlans on which DHCPV6 Snooping is enabled. A bit that is on (equal to 1) indicates that DHCPV6 snooping is enabled on corresponding vlan .
scalarHP-ICF-TCVidList.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.2
hpicfDSnoopV6DatabaseFile
A location to store the lease database or to retrieve it after a reboot. The location must be given in the form of a Uniform Resource Locator (URL) as defined in RFC 2396. The p…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.3
hpicfDSnoopV6DatabaseWriteDelay
The number of seconds to delay writing the DHCPv6 lease database file after a database change. This allows grouping multiple database changes into a single write. The default va…
scalarseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.4
hpicfDSnoopV6OutOfResourcesTrapCtrl
This object provides the operational status of DSNOOPv6 out of resource control trap. The default value is enabled. This notification trap is sent when the number of bindings ex…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.6
hpicfDSnoopV6ErrantReplyTrapCtrl
This object provides the operational status of DSNOOPv6 errant repy control trap. The default value is enabled. This notification trap is sent when a DHCPv6 reply packet is rece…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.7
hpicfDSnoopV6DatabaseFTPort
A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP.
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.8
hpicfDSnoopV6DatabaseSFTPUsername
A location to store the Username of the SFTP Server. The default value of username is root.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.9