hpicfBfdSessConfigReqMinRxInterval
HP-ICF-BFD-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.3
Object
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not want the remote system to send any periodic BFD control packets.
Context
- MIB
- HP-ICF-BFD-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfBfdSessConfigEntry
- Table
- hpicfBfdSessConfigTable
- Siblings
- 10
Syntax
BFD-TC-STD-MIBBfdIntervalTC
- Source
- BFD-TC-STD-MIBBfdIntervalTC
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfBfdSessConfigIfIndex The VLAN ifIndex value that uniquely
identifies a row in the hpicf bfd session Table
and corresponds to the VLAN on which the BFD
session exist. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.1 |
| hpicfBfdSessConfigAuthEncPwd The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When the bfdS… | column | IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationKeyTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.10 |
| hpicfBfdSessConfigRowStatus The status of this BFD session config entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.11 |
| hpicfBfdSessConfigDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved in thi… | column | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2 |
| hpicfBfdSessConfigReqMinEchoRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multih… | column | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.4 |
| hpicfBfdSessConfigDetectMult This object specifies the Detect time multiplier. | column | BFD-TC-STD-MIBBfdMultiplierTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.5 |
| hpicfBfdSessConfigAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.6 |
| hpicfBfdSessConfigAuthenticationType The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication r… | column | IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationTypeTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.7 |
| hpicfBfdSessConfigAuthenticationKeyID The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
The value -1 indicates that no Authentication Key ID will
be pre… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.8 |
| hpicfBfdSessConfigAuthenticationKey The authentication key. When the
hpicfBfdSessConfigAuthenticationType is simplePassword(1) and when the
encryption is enabled on the switch, the value of this object is the
encry… | column | IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationKeyTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.9 |