hpicfBfdSessConfigAuthenticationType
HP-ICF-BFD-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.7
Object
The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set. Max-access to this object as well as other authentication related objects are set to read-create in order to support management of a single key ID at a time, key rotation is not handled. Key update in practice must be done by atomic update using a set containing all affected objects in the same varBindList or otherwise risk the session dropping.
Context
- MIB
- HP-ICF-BFD-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfBfdSessConfigEntry
- Table
- hpicfBfdSessConfigTable
- Siblings
- 10
Syntax
IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationTypeTC
- Source
- IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationTypeTC
- Base type
Enumeration
Values & Constraints
Type Values
-1 | noAuthentication |
0 | reserved |
1 | simplePassword |
2 | keyedMD5 |
3 | meticulousKeyedMD5 |
4 | keyedSHA1 |
5 | meticulousKeyedSHA1 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfBfdSessConfigIfIndex The VLAN ifIndex value that uniquely
identifies a row in the hpicf bfd session Table
and corresponds to the VLAN on which the BFD
session exist. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.1 |
| hpicfBfdSessConfigAuthEncPwd The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When the bfdS… | column | IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationKeyTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.10 |
| hpicfBfdSessConfigRowStatus The status of this BFD session config entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.11 |
| hpicfBfdSessConfigDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved in thi… | column | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2 |
| hpicfBfdSessConfigReqMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified… | column | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.3 |
| hpicfBfdSessConfigReqMinEchoRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multih… | column | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.4 |
| hpicfBfdSessConfigDetectMult This object specifies the Detect time multiplier. | column | BFD-TC-STD-MIBBfdMultiplierTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.5 |
| hpicfBfdSessConfigAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.6 |
| hpicfBfdSessConfigAuthenticationKeyID The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
The value -1 indicates that no Authentication Key ID will
be pre… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.8 |
| hpicfBfdSessConfigAuthenticationKey The authentication key. When the
hpicfBfdSessConfigAuthenticationType is simplePassword(1) and when the
encryption is enabled on the switch, the value of this object is the
encry… | column | IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationKeyTC | .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.9 |