job-input-auto-continue-timeout
HP-Color-LaserJet-4500-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35
Object
scalar
optional
r/w
Integer32
The number of seconds the device waits after a job
related continuable error occurs before automatically
continuing. An example job related continuable error is
the job requesting a media size that is not available.
After the timeout expires, the device will continue
processing the job as if a continue event occurred, such
as the front panel continue key being pressed. If the
value is -1, the device does not automatically continue
after a job related continuable error occurs. If the
value is 0, the device immediately continues. If the
value is greater than 0, the value represents the
timeout value in seconds.
Additional information:
This object is used for media requests. When a general media mount condition
occurs, the timer will start and when the number of second specified by this object have expired, a override will
occur.
Supported values are in the
range of -1 to 3600. Setting to a value outside of that range causes
the printer to substitute a value (listed
below) and to return <noError>
status.
The values are as follow:
<-1 snaps to -1
>3600 snaps to 3600 (60 minutes)
Context
- MIB
- HP-Color-LaserJet-4500-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35- Type
- scalar
- Access
- readwrite
- Status
- optional
- Parent
- status-system
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| job-input-auto-continue-mode optional Returns or sets the device behavior when the desired
media is not currently available.
cCancelJob - The device cancels the job. The device
POS should explain what happens if th… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 |
| background-message | node | - | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 |
| error-log-clear optional Setting this object clears all the entries in the error
log sub-tree. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 |
| job-output-auto-continue-timeout optional Returns or sets the time that the printer will wait
after an output bin becomes full and the printer is
trying to deliver a sheet of media to that output bin.
When the timeout exp… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 |
| on-off-line optional To bring the PDL processing sub-system on or off line.
If the device is a printer, then the printer does not
process print job data when the printer is off line.
PML communication… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 |
| localization-languages-supported optional The list of languages supported by the device. The
languages are primarily, but not limited to, two
character codes from ISO 639, each separated by a comma
character.
Additional i… | scalar | DisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 |
| localization-countries-supported optional The list of countries supported by the device. The
countries are primarily, but not limited to, two
character codes from ISO 3166, each separated by a comma
character.
Additional … | scalar | DisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 |
| continue optional A device can support a class of errors called
continuable errors. When a continuable error is
encountered, the device requires a continue event to
occur before the device will co… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 |
| auto-continue optional Indicates if the device will automatically continue
after encountering a continuable error. If AUTO-
CONTINUE is set to eOn, the device will automatically
generate continue event… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 |