hpSwitchRadiusTLSRetryTimer
HP-AUTH-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.18
Object
column
Integer32
The number of minutes after which the RADIUS Server TLS connection will be re-established.
Context
- MIB
- HP-AUTH-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpSwitchRadiusServerEntry
- Table
- hpSwitchRadiusServerTable
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchRadiusServerIndex The index value which uniquely identifies a row in
the RADIUS Servers Table. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.1 |
| hpSwitchRadiusServerKeyEncrypted An encrypted form of the key used in encrypting the
packets passed between the RADIUS server and the client.
This key must match the one configured on the server.
This object may … | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.10 |
| hpSwitchRadiusServerAddrType Type of RADIUS Server IP Address stored in
hpSwitchRadiusServerAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.11 |
| hpSwitchRadiusServerAddress The IPv4 or IPv6 Address of the RADIUS server. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.12 |
| hpSwitchRadiusServerDynAutzTimeWindowType Window type indicates the acceptable window size for
dynamic authorization messages. Positive window type
will allow messages when time difference between sender
Event-TimeStamp a… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.13 |
| hpSwitchRadiusServerFqdn The FQDN address of RADIUS Server. When the RADIUS server
has been configured with IPv6 address of IPv4 address,
the value of this object will be set to Null. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.14 |
| hpSwitchRadiusServerIsClearPass This object indicates whether this RADIUS Server
is hosted by ClearPass or not.This mib object will be applicable
only if there is a Hosted ClearPass server | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.15 |
| hpSwitchRadiusTLSEnable This object enables the RADSEC protocol and encrypts
the RADIUS messages using TLS by establishing a TCP
connection with the RADIUS server.
By default, it is not enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.16 |
| hpSwitchRadiusTLSPort The destination TCP port number to use for establishing
a connection with RADIUS TLS server. The default
value is 2083. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.17 |
| hpSwitchRadiusServerIpAddr deprecated The IP address of a RADIUS Server. When the RADIUS server
has been configured with IPv6 address, the value of
this object will be set to Null. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2 |
| hpSwitchRadiusServerKey The key used in encrypting the packets passed between
the RADIUS server and the client. This key must match
the one configured on the server. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.3 |
| hpSwitchRadiusServerAuthPortNumber The UDP destination port number to use for sending
authentication requests to this RADIUS Server. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.4 |
| hpSwitchRadiusServerAcctPortNumber The UDP destination port number to use for sending
accounting requests to this RADIUS server. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.5 |
| hpSwitchRadiusServerDynAutzEnabled This object indicates whether Dynamic Authorization
messages (Disconnect-Requests and CoA-Requests) are
authorized for processing from this RADIUS Server. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.6 |
| hpSwitchRadiusServerDynAutzTimeWindow A non-zero value indicates that the Event-Timestamp
attribute must be used in the dynamic authorization
communication exchange between the NAS and the RADIUS
server. Such a value … | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.7 |
| hpSwitchRadiusServerStatus Status of Servers Table row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.8 |
| hpSwitchRadiusServerIsOobm This object indicates whether this RADIUS Server
is reachable over OOBM (Out Of Band Management)
interface or not. This mib object will be applicable
only if there is a physical … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.9 |