hpSwitchRadiusServerIpAddr

HP-AUTH-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2
MIB view Table view

Object

column deprecated r/w SNMPv2-SMIIpAddress 
The IP address of a RADIUS Server. When the RADIUS server 
has been configured with IPv6 address, the value of 
this object will be set to Null.

Context

MIB
HP-AUTH-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2
Type
column
Access
readwrite
Status
deprecated
Parent
hpSwitchRadiusServerEntry
Table
hpSwitchRadiusServerTable
Siblings
17

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpSwitchRadiusServerIndex
The index value which uniquely identifies a row in the RADIUS Servers Table.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.1
hpSwitchRadiusServerKeyEncrypted
An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may …
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.10
hpSwitchRadiusServerAddrType
Type of RADIUS Server IP Address stored in hpSwitchRadiusServerAddress.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.11
hpSwitchRadiusServerAddress
The IPv4 or IPv6 Address of the RADIUS server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.12
hpSwitchRadiusServerDynAutzTimeWindowType
Window type indicates the acceptable window size for dynamic authorization messages. Positive window type will allow messages when time difference between sender Event-TimeStamp a…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.13
hpSwitchRadiusServerFqdn
The FQDN address of RADIUS Server. When the RADIUS server has been configured with IPv6 address of IPv4 address, the value of this object will be set to Null.
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.14
hpSwitchRadiusServerIsClearPass
This object indicates whether this RADIUS Server is hosted by ClearPass or not.This mib object will be applicable only if there is a Hosted ClearPass server
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.15
hpSwitchRadiusTLSEnable
This object enables the RADSEC protocol and encrypts the RADIUS messages using TLS by establishing a TCP connection with the RADIUS server. By default, it is not enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.16
hpSwitchRadiusTLSPort
The destination TCP port number to use for establishing a connection with RADIUS TLS server. The default value is 2083.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.17
hpSwitchRadiusTLSRetryTimer
The number of minutes after which the RADIUS Server TLS connection will be re-established.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.18
hpSwitchRadiusServerKey
The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.3
hpSwitchRadiusServerAuthPortNumber
The UDP destination port number to use for sending authentication requests to this RADIUS Server.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.4
hpSwitchRadiusServerAcctPortNumber
The UDP destination port number to use for sending accounting requests to this RADIUS server.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.5
hpSwitchRadiusServerDynAutzEnabled
This object indicates whether Dynamic Authorization messages (Disconnect-Requests and CoA-Requests) are authorized for processing from this RADIUS Server.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.6
hpSwitchRadiusServerDynAutzTimeWindow
A non-zero value indicates that the Event-Timestamp attribute must be used in the dynamic authorization communication exchange between the NAS and the RADIUS server. Such a value …
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.7
hpSwitchRadiusServerStatus
Status of Servers Table row.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.8
hpSwitchRadiusServerIsOobm
This object indicates whether this RADIUS Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.9