hpSwitchRadiusAuthKeyEncrypted

HP-AUTH-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.16.6.6
MIB view Table view

Object

scalar r/w OctetString 
An encrypted form of the key used in encrypting the
packets passed between the RADIUS server and the client.
This key must match the one configured on the server.
This object may only be read or written when
hpSwitchAuthenticationEncryptCredentialsMethod is set to a
value other than none(0). At most one of
hpSwitchRadiusAuthKey and hpSwitchRadiusAuthKeyEncrypted
may be set in any transaction. This object should only be
written with an encrypted key previously read from a
compatible HP Networking device.

Context

MIB
HP-AUTH-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.6
Type
scalar
Access
readwrite
Status
current
Parent
hpSwitchRadiusConfig
Siblings
24

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-256

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpSwitchRadiusDeadTime
The length of time in minutes a RADIUS server is skipped over by transaction requests (from 0 up to 24 hours). Used to improve RADIUS response times when some servers might be un…
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.1
hpSwitchRadiusTracking
To enable or disable the RADIUS service tracking. If this feature is enabled, it is used to send access-request packets at regular intervals to track the availability of server.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.6.10
hpSwitchRadiusTrackingUserName
This user name will be used to send Access-Request packets to the RADIUS server to track it.
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.11
hpSwitchRadiusCppmIdentity
The ClearPass identity value to be used during authentication with ClearPass server.
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.12
hpSwitchRadiusCppmKey
The ClearPass key value to be used during authentication with ClearPass server.
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.13
hpSwitchRadiusCppmEncryptedKey
The encrypted ClearPass key value to be used during authentication with ClearPass server.The key value used to set this object should be read from a compatible HPE netwokring devi…
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.14
hpSwitchRadiusDeadTimeInfinite
If this is set to true, a dead RADIUS server is skipped over by transaction requests until the RADIUS server is tracked up and alive by RADIUS tracking. The default value is set t…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.6.15
hpSwitchRadiusTrackingInterval
The regular time interval in seconds at which RADIUS access-request packets are sent to track the availability of RADIUS server. The default time interval is 5 minutes.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.16
hpSwitchRadiusTrackingPassword
This password will be used in Access-Request packets sent to the RADIUS server to track it.
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.17
hpSwitchRadiusTrackDeadOnly
If this is set to true, RADIUS tracking packets are sent only to dead servers.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.6.18
hpSwitchRadiusTrackReqPktCount
Number of Access Request Packet to be sent for tracking.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.19
hpSwitchRadiusTimeout
The duration in seconds to wait for a response from the RADIUS server host.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.2
hpSwitchRadiusTrackPassEncrypt
The password is configured in the encrypted form. The password after decryption is sent in Access-Request packet to the RADIUS server for tracking. This object can be read or writ…
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.20
hpSwitchRadiusFramedIpv4Address
If this is set to true, framedIpv4Address attribute will be added to the access-request packet. The default value is set to FLASE.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.6.21
hpSwitchRadiusFqdnRetry
The interval at which the resolution of the FQDN is retried for the radius server which failed to resolve the FQDN at the time of configuring it. Retry interval is 0-5 minutes. …
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.22
hpSwitchRadiusExcludeVsa
If this is set to true, RADIUS packets are sent without VSA capability advertisement.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.6.23
hpSwitchRadiusTLSTimeout
The duration in seconds to wait for a response from the RADIUS TLS server host.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.24
hpSwitchRadiusTLSConnectionTimeout
The duration in seconds to wait for a response from the server during TLS session establishment.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.25
hpSwitchRadiusTLSDeadTime
The length of time in minutes a RADIUS TLS server is skipped over by transaction requests (from 0 up to 24 hours). Used to improve RADIUS response times when some servers might b…
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.26
hpSwitchRadiusTLSDeadTimeInfinite
If this is set to true, a dead RADIUS TLS server is skipped over by transaction requests until the RADIUS TLS server is tracked up and alive by RADIUS tracking. The default val…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.16.6.27
hpSwitchRadiusTunnelPrivateGroupId
If value is set to static, statically configured untagged VLAN Identifier for the port will be sent as the value of 'Tunnel-Private-Group-ID' attribute in RADIUS Access-Request pa…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.16.6.28
hpSwitchRadiusRetransmitAttempts
Maximum number of retransmission attempts.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.3
hpSwitchRadiusAuthKey
The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.16.6.4
hpSwitchRadiusDynAutzPortNumber
The UDP port number to listen for Disconnect and Change-of-Authorization messages.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.16.6.5