hm2NetVlanID
HM2-NETCONFIG-MIB ·
.1.3.6.1.4.1.248.11.20.1.1.7
Object
scalar
r/w
Integer32
VLAN-ID of the IP protocol stack. The VLAN-ID value means that only traffic of the appropriate VLAN is accepted and outgoing traffic uses this VLAN-ID.
Context
- MIB
- HM2-NETCONFIG-MIB
- OID
.1.3.6.1.4.1.248.11.20.1.1.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hm2NetStaticGroup
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-4042
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2NetConfigProtocol The switch's network configuration protocol.
The default value is dependent of the device type. | scalar | Enumeration | .1.3.6.1.4.1.248.11.20.1.1.1 |
| hm2NetMgmtPort The port number of the Ethernet port, which gets the access to
the switch management.
If the value is set to 0, the access to the switch management is
permitted from all ports of… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.20.1.1.10 |
| hm2NetDHCPClientId The identifier string that is currently used by the client in the
request packets to the server for obtaining lease information. | scalar | OctetString | .1.3.6.1.4.1.248.11.20.1.1.11 |
| hm2NetLocalIPAddrType Local IP address type. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.248.11.20.1.1.2 |
| hm2NetDHCPClientConfigLoad Enables/disables the DHCP options 4/42 (time servers) and 66/67
(Load config over TFTP on boot) on DHCP/BOOTP client. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.20.1.1.20 |
| hm2NetDHCPClientLeaseTime Displays the remaining lease of the management IP time in seconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.20.1.1.21 |
| hm2NetLocalIPAddr IP address of the management agent board.
Changing this value will take effect after activating
with hm2NetAction. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.248.11.20.1.1.3 |
| hm2NetIPv6AdminStatus Enable/Disable IPv6 feature. A (1) enables, a (2) disables. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.20.1.1.30 |
| hm2NetIPv6ConfigProtocol The switch's network IPv6 configuration protocol. | scalar | Enumeration | .1.3.6.1.4.1.248.11.20.1.1.31 |
| hm2NetIPv6GatewayAddrType Default gateway IPv6 address type. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.248.11.20.1.1.32 |
| hm2NetIPv6GatewayAddr IPv6 address of the default gateway. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.248.11.20.1.1.33 |
| hm2NetIPv6DupAddrDetectTrans Number of Neighbor Solicitations for DAD mechanism. | scalar | Integer32 | .1.3.6.1.4.1.248.11.20.1.1.34 |
| hm2NetIPv6DHCPClientId The identifier string that is currently used by the client in the
IPv6 implementation to request packets to the server to obtain
lease information. | scalar | OctetString | .1.3.6.1.4.1.248.11.20.1.1.35 |
| hm2NetIPv6LocalAddrTable The list of IPv6 addresses and their prefixes
for the network port. | table | - | .1.3.6.1.4.1.248.11.20.1.1.36 |
| hm2NetPrefixLength The length of the IP netmask. | scalar | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.248.11.20.1.1.4 |
| hm2NetGatewayIPAddrType Default gateway IP address type. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.248.11.20.1.1.5 |
| hm2NetAction This object, when read, always returns a value of other(1).
Setting the object to activate(2) causes a reconfiguration
of the IP protocol stack with the current values of
hm2NetL… | scalar | Enumeration | .1.3.6.1.4.1.248.11.20.1.1.50 |
| hm2NetGatewayIPAddr IP address of the default gateway.
Changing this value will take effect after activating
with hm2NetAction. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.248.11.20.1.1.6 |
| hm2NetVlanPriority VLAN Priority which is used in management replies. | scalar | Integer32 | .1.3.6.1.4.1.248.11.20.1.1.8 |
| hm2NetIpDscpPriority IP DSCP value which is used in management replies. | scalar | Integer32 | .1.3.6.1.4.1.248.11.20.1.1.9 |