hm2NetMgmtPort

HM2-NETCONFIG-MIB · .1.3.6.1.4.1.248.11.20.1.1.10
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
The port number of the Ethernet port, which gets the access to
the switch management.
If the value is set to 0, the access to the switch management is 
permitted from all ports of the switch.
This object is only applicable for embedded switches which are 
integrated into customer devices.

Context

MIB
HM2-NETCONFIG-MIB
OID
.1.3.6.1.4.1.248.11.20.1.1.10
Type
scalar
Access
readwrite
Status
current
Parent
hm2NetStaticGroup
Siblings
20

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2NetConfigProtocol
The switch's network configuration protocol. The default value is dependent of the device type.
scalarEnumeration.1.3.6.1.4.1.248.11.20.1.1.1
hm2NetDHCPClientId
The identifier string that is currently used by the client in the request packets to the server for obtaining lease information.
scalarOctetString.1.3.6.1.4.1.248.11.20.1.1.11
hm2NetLocalIPAddrType
Local IP address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.20.1.1.2
hm2NetDHCPClientConfigLoad
Enables/disables the DHCP options 4/42 (time servers) and 66/67 (Load config over TFTP on boot) on DHCP/BOOTP client.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.20.1.1.20
hm2NetDHCPClientLeaseTime
Displays the remaining lease of the management IP time in seconds.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.20.1.1.21
hm2NetLocalIPAddr
IP address of the management agent board. Changing this value will take effect after activating with hm2NetAction.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.20.1.1.3
hm2NetIPv6AdminStatus
Enable/Disable IPv6 feature. A (1) enables, a (2) disables.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.20.1.1.30
hm2NetIPv6ConfigProtocol
The switch's network IPv6 configuration protocol.
scalarEnumeration.1.3.6.1.4.1.248.11.20.1.1.31
hm2NetIPv6GatewayAddrType
Default gateway IPv6 address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.20.1.1.32
hm2NetIPv6GatewayAddr
IPv6 address of the default gateway.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.20.1.1.33
hm2NetIPv6DupAddrDetectTrans
Number of Neighbor Solicitations for DAD mechanism.
scalarInteger32.1.3.6.1.4.1.248.11.20.1.1.34
hm2NetIPv6DHCPClientId
The identifier string that is currently used by the client in the IPv6 implementation to request packets to the server to obtain lease information.
scalarOctetString.1.3.6.1.4.1.248.11.20.1.1.35
hm2NetIPv6LocalAddrTable
The list of IPv6 addresses and their prefixes for the network port.
table-.1.3.6.1.4.1.248.11.20.1.1.36
hm2NetPrefixLength
The length of the IP netmask.
scalarINET-ADDRESS-MIBInetAddressPrefixLength.1.3.6.1.4.1.248.11.20.1.1.4
hm2NetGatewayIPAddrType
Default gateway IP address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.20.1.1.5
hm2NetAction
This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack with the current values of hm2NetL…
scalarEnumeration.1.3.6.1.4.1.248.11.20.1.1.50
hm2NetGatewayIPAddr
IP address of the default gateway. Changing this value will take effect after activating with hm2NetAction.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.20.1.1.6
hm2NetVlanID
VLAN-ID of the IP protocol stack. The VLAN-ID value means that only traffic of the appropriate VLAN is accepted and outgoing traffic uses this VLAN-ID.
scalarInteger32.1.3.6.1.4.1.248.11.20.1.1.7
hm2NetVlanPriority
VLAN Priority which is used in management replies.
scalarInteger32.1.3.6.1.4.1.248.11.20.1.1.8
hm2NetIpDscpPriority
IP DSCP value which is used in management replies.
scalarInteger32.1.3.6.1.4.1.248.11.20.1.1.9