hm2DPIProfileEnipRowStatus
HM2-FW-MIB ·
.1.3.6.1.4.1.248.11.79.1.3.21.4.1.6
Object
This is a standard row status value: - active(1): The profile is active. You cannot modify it. - notInService(2): The profile is inactive because of user action. You cannot inactivate the profile if an active enforcer mappings to it. - notReady(3): The profile is inactive because of agent action. - createAndGo(4): Create the profile with default parameters activated. - createAndWait(5): Create the profile inactive. - destroy(6): Delete the profile. You cannot delete the active profile or if an enforcer mappings to it.
Context
- MIB
- HM2-FW-MIB
- OID
.1.3.6.1.4.1.248.11.79.1.3.21.4.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2DPIProfileEnipEntry
- Table
- hm2DPIProfileEnipTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DPIProfileEnipIndex Profile index of this DPI EtherNet/IP profile | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.1 |
| hm2DPIProfileEnipTcpReset Enables or disables the resetting of TCP connection.
The reset connection message shall be sent in case a packet is dropped, if TCP reset is enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.10 |
| hm2DPIProfileEnipDescription User defined textual description related to this profile. | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.2 |
| hm2DPIProfileEnipFunctionType The function types of the corresponding commands:
o readonly(1): Selects read only commands for the command list.
o readwrite(2): Selects read write commands for the command list.… | column | Enumeration | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.3 |
| hm2DPIProfileEnipSanityCheck If a sanity check including format and specification
for all packets shall be done, then it must be enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.4 |
| hm2DPIProfileEnipDebug Enables or disables the debug information in a reset connection message.
If a reset connection message shall contain debug information, then it must be enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.5 |
| hm2DPIProfileEnipDefaultObjectList Index of entries to be included from default object list
as per ENIP standard.
Allowed formats are: (Index range <1-347>)
- keyword 'none' for excluding and 'all' for including th… | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.7 |
| hm2DPIProfileEnipWildCardServices Multiple service codes can be listed separated by a comma (',')
- single service code (eg: 0x10)
- comma separated list of service codes (eg: 0x12,0x31,0x5F)
- Service code starts… | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.8 |
| hm2DPIProfileEnipAllowEmbPCCC Enables or disables the DPI on PCCC messages.
If DPI is required on PCCC messages that are encapsulated within CIP objects,
then Allow embedded PCCC must be enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.9 |