hm2DPIProfileEnipDefaultObjectList
HM2-FW-MIB ·
.1.3.6.1.4.1.248.11.79.1.3.21.4.1.7
Object
column
r/w
OctetString
Index of entries to be included from default object list as per ENIP standard. Allowed formats are: (Index range <1-347>) - keyword 'none' for excluding and 'all' for including the default object list. - any single index (e.g. 10) - index range with first and last index separated by hyphen (e.g. '10-15') - comma separated list of index (e.g. 12,25,123) - combination of the points above (e.g. 10,25-30,125,300) - Total number of decimal values can be up to 347.
Context
- MIB
- HM2-FW-MIB
- OID
.1.3.6.1.4.1.248.11.79.1.3.21.4.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2DPIProfileEnipEntry
- Table
- hm2DPIProfileEnipTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-1280
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DPIProfileEnipIndex Profile index of this DPI EtherNet/IP profile | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.1 |
| hm2DPIProfileEnipTcpReset Enables or disables the resetting of TCP connection.
The reset connection message shall be sent in case a packet is dropped, if TCP reset is enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.10 |
| hm2DPIProfileEnipDescription User defined textual description related to this profile. | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.2 |
| hm2DPIProfileEnipFunctionType The function types of the corresponding commands:
o readonly(1): Selects read only commands for the command list.
o readwrite(2): Selects read write commands for the command list.… | column | Enumeration | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.3 |
| hm2DPIProfileEnipSanityCheck If a sanity check including format and specification
for all packets shall be done, then it must be enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.4 |
| hm2DPIProfileEnipDebug Enables or disables the debug information in a reset connection message.
If a reset connection message shall contain debug information, then it must be enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.5 |
| hm2DPIProfileEnipRowStatus This is a standard row status value:
- active(1): The profile is active. You cannot modify it.
- notInService(2): The profile is inactive because of user action.
You cannot inac… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.6 |
| hm2DPIProfileEnipWildCardServices Multiple service codes can be listed separated by a comma (',')
- single service code (eg: 0x10)
- comma separated list of service codes (eg: 0x12,0x31,0x5F)
- Service code starts… | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.8 |
| hm2DPIProfileEnipAllowEmbPCCC Enables or disables the DPI on PCCC messages.
If DPI is required on PCCC messages that are encapsulated within CIP objects,
then Allow embedded PCCC must be enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.4.1.9 |