hm2DevSecTrapCause

HM2-DIAGNOSTIC-MIB · .1.3.6.1.4.1.248.11.22.1.3.3.1.2
MIB view Table view

Object

scalar Enumeration 
This object identifies the cause for a trap. 
The index of the entity which produces the trap
is specified by hm2DevMonTrapCauseIndex.

Context

MIB
HM2-DIAGNOSTIC-MIB
OID
.1.3.6.1.4.1.248.11.22.1.3.3.1.2
Type
scalar
Access
readonly
Status
current
Parent
hm2DevSecConfigGroup
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
10password-change
11password-min-length
12password-policy-not-configured
13password-policy-inactive
14telnet-enabled
15http-enabled
16snmp-unsecure
17sysmon-enabled
18ext-nvm-update-enabled
19no-link
20hidisc-enabled
21ext-nvm-config-load-unsecure
22iec61850-mms-enabled
23https-certificate-warning
24modbus-tcp-enabled
25ethernet-ip-enabled
26profinet-io-enabled
29pml-disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2DevSecTrapEnable
Determines whether a trap shall be sent or not, when the device security operating state changes.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.1
hm2DevSecSenseTelnetEnabled
Enable or disable to check if telnet is enabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.10
hm2DevSecSenseHttpEnabled
Enable or disable to check if HTTP is enabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.11
hm2DevSecSenseSnmpUnsecure
Enable or disable to check if SNMP v1/v2 is enabled or v3 encryption is disabled.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.12
hm2DevSecSenseSysmonEnabled
Enable or disable to check if sysmon1 access is not disabled.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.13
hm2DevSecSenseExtNvmUpdateEnabled
Enable or disable to check if external non-volatile memory update is not disabled.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.14
hm2DevSecSenseNoLinkEnabled
Enable or disable to check if at least one port has no link but admin state is up.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.15
hm2DevSecSenseHiDiscoveryEnabled
Enable or disable to check if HiDiscovery is enabled and the mode is 'read-write'.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.16
hm2DevSecSenseExtNvmConfigLoadUnsecure
Enable or disable to check if the configuration load from external NVM is unsecure. (The configuration priority of the external NVM is set to 'first', 'second' or 'third' and the…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.17
hm2DevSecSenseIec61850MmsEnabled
Enable or disable to check if IEC 61850 MMS is enabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.18
hm2DevSecSenseHttpsCertificateWarning
Enable or disable to check for the presence of the auto generated self-signed HTTPS certificate.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.19
hm2DevSecSenseModbusTcpEnabled
Enable or disable to check if Modbus/TCP server is enabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.20
hm2DevSecSenseEtherNetIpEnabled
Enable or disable to check if EtherNet/IP protocol is enabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.21
hm2DevSecSenseProfinetIOEnabled
Enable or disable to check if ProfinetIO protocol is enabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.22
hm2DevSecSensePMLDisabled
Enable or disable to check if Port MAC Locking is disabled on the switch.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.23
hm2DevSecTrapCauseIndex
This attribute specifies the entity which produces the trap. ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet) no-link: index of interface table 0: other err…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.22.1.3.3.1.3
hm2DevSecOperState
This attribute shows the current operating state of the signal contact.
scalarEnumeration.1.3.6.1.4.1.248.11.22.1.3.3.1.4
hm2DevSecOperTimeStamp
This attribute shows the local system time (hm2SystemLocalTime) of the last hm2DevSecOperState change.
scalarHM2-TC-MIBHmTimeSeconds1970.1.3.6.1.4.1.248.11.22.1.3.3.1.5
hm2DevSecSensePasswordChange
Enable or disable to check if default passwords for 'user' and 'admin' are not changed.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.6
hm2DevSecSensePasswordMinLength
Enable or disable to check if configured minimum password length is < 8 characters.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.7
hm2DevSecSensePasswordStrengthNotConfigured
Enable or disable minimum password strength to check if (1 uppercase, 1 lowercase, 1 number, 1 non-alphanumeric) is not configured.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.8
hm2DevSecSenseBypassPasswordStrength
Enable or disable to check if at least one user is configured to bypass strength check.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.3.1.9