hm2DevSecOperTimeStamp
HM2-DIAGNOSTIC-MIB ·
.1.3.6.1.4.1.248.11.22.1.3.3.1.5
Object
scalar
HM2-TC-MIBHmTimeSeconds1970
This attribute shows the local system time (hm2SystemLocalTime) of the last hm2DevSecOperState change.
Context
- MIB
- HM2-DIAGNOSTIC-MIB
- OID
.1.3.6.1.4.1.248.11.22.1.3.3.1.5- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hm2DevSecConfigGroup
- Siblings
- 22
Syntax
HM2-TC-MIBHmTimeSeconds1970
- Source
- HM2-TC-MIBHmTimeSeconds1970
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DevSecTrapEnable Determines whether a trap shall be sent or not, when
the device security operating state changes. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.1 |
| hm2DevSecSenseTelnetEnabled Enable or disable to check if telnet is enabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.10 |
| hm2DevSecSenseHttpEnabled Enable or disable to check if HTTP is enabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.11 |
| hm2DevSecSenseSnmpUnsecure Enable or disable to check if SNMP v1/v2 is enabled or v3 encryption is disabled. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.12 |
| hm2DevSecSenseSysmonEnabled Enable or disable to check if sysmon1 access is not disabled. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.13 |
| hm2DevSecSenseExtNvmUpdateEnabled Enable or disable to check if external non-volatile memory update is not disabled. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.14 |
| hm2DevSecSenseNoLinkEnabled Enable or disable to check if at least one port has no link but admin state is up. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.15 |
| hm2DevSecSenseHiDiscoveryEnabled Enable or disable to check if HiDiscovery is enabled and the mode is 'read-write'. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.16 |
| hm2DevSecSenseExtNvmConfigLoadUnsecure Enable or disable to check if the configuration load from external NVM is unsecure.
(The configuration priority of the external NVM is set
to 'first', 'second' or 'third' and the… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.17 |
| hm2DevSecSenseIec61850MmsEnabled Enable or disable to check if IEC 61850 MMS is enabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.18 |
| hm2DevSecSenseHttpsCertificateWarning Enable or disable to check for the presence of the auto generated self-signed HTTPS certificate. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.19 |
| hm2DevSecTrapCause This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2DevMonTrapCauseIndex. | scalar | Enumeration | .1.3.6.1.4.1.248.11.22.1.3.3.1.2 |
| hm2DevSecSenseModbusTcpEnabled Enable or disable to check if Modbus/TCP server is enabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.20 |
| hm2DevSecSenseEtherNetIpEnabled Enable or disable to check if EtherNet/IP protocol is enabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.21 |
| hm2DevSecSenseProfinetIOEnabled Enable or disable to check if ProfinetIO protocol is enabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.22 |
| hm2DevSecSensePMLDisabled Enable or disable to check if Port MAC Locking is disabled on the switch. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.23 |
| hm2DevSecTrapCauseIndex This attribute specifies the entity which produces the trap.
ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet)
no-link: index of interface table
0: other err… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.22.1.3.3.1.3 |
| hm2DevSecOperState This attribute shows the current operating state of the signal contact. | scalar | Enumeration | .1.3.6.1.4.1.248.11.22.1.3.3.1.4 |
| hm2DevSecSensePasswordChange Enable or disable to check if default passwords for 'user' and 'admin' are not changed. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.6 |
| hm2DevSecSensePasswordMinLength Enable or disable to check if configured minimum password length is < 8 characters. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.7 |
| hm2DevSecSensePasswordStrengthNotConfigured Enable or disable minimum password strength to check if
(1 uppercase, 1 lowercase, 1 number, 1 non-alphanumeric) is not configured. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.8 |
| hm2DevSecSenseBypassPasswordStrength Enable or disable to check if at least one user is configured to bypass strength check. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.22.1.3.3.1.9 |