hh3cNqaStatResSentProbes

HH3C-NQA-MIB · .1.3.6.1.4.1.25506.8.3.1.11.1.8
MIB view Table view

Object

column probes SNMPv2-SMICounter32 
The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent.

Context

MIB
HH3C-NQA-MIB
OID
.1.3.6.1.4.1.25506.8.3.1.11.1.8
Type
column
Access
readonly
Status
current
Units
probes
Parent
hh3cNqaStatisticsResultsEntry
Table
hh3cNqaStatisticsResultsTable
Siblings
31

Syntax

probes SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cNqaStatResIndex
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hh3cNqaStatResIndex values at 1 an…
columnUnsigned32.1.3.6.1.4.1.25506.8.3.1.11.1.1
hh3cNqaStatResStartTime
This object contains the start time of the statistic.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.25506.8.3.1.11.1.10
hh3cNqaStatResInterval
This object contains the interval between two times of statistic.
columnseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.11
hh3cNqaStatResRttNumDisconnects
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.12
hh3cNqaStatResRttTimeouts
The number of times that a probe failed because the probe timed out.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.13
hh3cNqaStatResRttBusies
The number of times that a NQA probe failed because errors related to sockets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.14
hh3cNqaStatResRttNoConnections
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.15
hh3cNqaStatResRttDrops
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.16
hh3cNqaStatResRttSequenceErrors
The number of packets arrived out of sequence.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.17
hh3cNqaStatResRttErrors
The number of other errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.18
hh3cNqaStatResLostPacketRatio
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent pa…
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.19
hh3cNqaStatResIpTargetAddressType
This object indicates the type of address stored in the corresponding hh3cNqaStatResIpTargetAddress object.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.25506.8.3.1.11.1.2
hh3cNqaStatResPacketLateArrival
The value of this object reflects the number of the packets that arrived after the timeout.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.20
hh3cNqaStatResRttSum
This object contains the sum for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.21
hh3cNqaStatResNumOfDelaySD
The number of one way times from source to destination that are successfully measured.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.22
hh3cNqaStatResMinDelaySD
The minimum one way times from source to destination.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.23
hh3cNqaStatResMaxDelaySD
The maximum one way times from source to destination.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.24
hh3cNqaStatResSumDelaySD
The sum of one way times from source to destination.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.25
hh3cNqaStatResSum2DelaySD
The sum of squares of one way times from source to destination.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.26
hh3cNqaStatResNumOfDelayDS
The number of one way times from destination to source that are successfully measured.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.27
hh3cNqaStatResMinDelayDS
The minimum one way times from destination to source.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.28
hh3cNqaStatResMaxDelayDS
The maximum one way times from destination to source.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.29
hh3cNqaStatResIpTargetAddress
This object represent the host address to be used at a remote host for performing a network analysis operation.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.25506.8.3.1.11.1.3
hh3cNqaStatResSumDelayDS
The sum of one way times from destination to source.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.30
hh3cNqaStatResSum2DelayDS
The sum of squares of one way times from destination to source.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.31
hh3cNqaStatResLostPacketPermillage
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 100, that means source device only had received 900 packets per thousand.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.32
hh3cNqaStatResMinRtt
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.4
hh3cNqaStatResMaxRtt
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.5
hh3cNqaStatResAverageRtt
The average NQA probe round-trip-time (RTT).
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.25506.8.3.1.11.1.6
hh3cNqaStatResProbeResponses
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.7
hh3cNqaStatResRttSumOfSquares
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
columnmilliseconds SNMPv2-SMICounter32.1.3.6.1.4.1.25506.8.3.1.11.1.9