hh3cNqaStatResMaxDelaySD
HH3C-NQA-MIB ·
.1.3.6.1.4.1.25506.8.3.1.11.1.24
Object
column
SNMPv2-SMIGauge32
The maximum one way times from source to destination.
Context
- MIB
- HH3C-NQA-MIB
- OID
.1.3.6.1.4.1.25506.8.3.1.11.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hh3cNqaStatisticsResultsEntry
- Table
- hh3cNqaStatisticsResultsTable
- Siblings
- 31
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cNqaStatResIndex An entry in this table is created when the statistics
result of a NQA probe is determined.
An implementation MUST start assigning
hh3cNqaStatResIndex values at 1 an… | column | Unsigned32 | .1.3.6.1.4.1.25506.8.3.1.11.1.1 |
| hh3cNqaStatResStartTime This object contains the start time of the statistic. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.25506.8.3.1.11.1.10 |
| hh3cNqaStatResInterval This object contains the interval between two times of statistic. | column | seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.11 |
| hh3cNqaStatResRttNumDisconnects The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.12 |
| hh3cNqaStatResRttTimeouts The number of times that a probe failed because the probe timed out. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.13 |
| hh3cNqaStatResRttBusies The number of times that a NQA probe failed because
errors related to sockets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.14 |
| hh3cNqaStatResRttNoConnections The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.15 |
| hh3cNqaStatResRttDrops The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.16 |
| hh3cNqaStatResRttSequenceErrors The number of packets arrived out of sequence. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.17 |
| hh3cNqaStatResRttErrors The number of other errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.18 |
| hh3cNqaStatResLostPacketRatio The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent pa… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.19 |
| hh3cNqaStatResIpTargetAddressType This object indicates the type of address stored
in the corresponding hh3cNqaStatResIpTargetAddress
object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.25506.8.3.1.11.1.2 |
| hh3cNqaStatResPacketLateArrival The value of this object reflects the number of the packets that
arrived after the timeout. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.20 |
| hh3cNqaStatResRttSum This object contains the sum for all NQA responses received
during the test lifetime. The value of this object MUST be
reported as 0 when no NQA responses have been received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.21 |
| hh3cNqaStatResNumOfDelaySD The number of one way times from source to destination that are
successfully measured. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.22 |
| hh3cNqaStatResMinDelaySD The minimum one way times from source to destination. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.23 |
| hh3cNqaStatResSumDelaySD The sum of one way times from source to destination. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.25 |
| hh3cNqaStatResSum2DelaySD The sum of squares of one way times from source to destination. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.26 |
| hh3cNqaStatResNumOfDelayDS The number of one way times from destination to source that are
successfully measured. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.27 |
| hh3cNqaStatResMinDelayDS The minimum one way times from destination to source. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.28 |
| hh3cNqaStatResMaxDelayDS The maximum one way times from destination to source. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.29 |
| hh3cNqaStatResIpTargetAddress This object represent the host address to be used at a remote host for
performing a network analysis operation. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.25506.8.3.1.11.1.3 |
| hh3cNqaStatResSumDelayDS The sum of one way times from destination to source. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.30 |
| hh3cNqaStatResSum2DelayDS The sum of squares of one way times from destination to source. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.31 |
| hh3cNqaStatResLostPacketPermillage The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 100, that means source device
only had received 900 packets per thousand. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.32 |
| hh3cNqaStatResMinRtt The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.4 |
| hh3cNqaStatResMaxRtt The maximum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.5 |
| hh3cNqaStatResAverageRtt The average NQA probe round-trip-time (RTT). | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.8.3.1.11.1.6 |
| hh3cNqaStatResProbeResponses The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.7 |
| hh3cNqaStatResSentProbes The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.8 |
| hh3cNqaStatResRttSumOfSquares This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received. | column | milliseconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.3.1.11.1.9 |