hh3cIfMtu
HH3C-IF-EXT-MIB ·
.1.3.6.1.4.1.25506.2.40.2.3.2.1.2
Object
The size of the largest datagram that can be sent or received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interfaces.
Context
- MIB
- HH3C-IF-EXT-MIB
- OID
.1.3.6.1.4.1.25506.2.40.2.3.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hh3cIfEntry
- Table
- hh3cIfTable
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cIfUpDownTimes The interface's up/down times, since the device was initialized. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.1 |
| hh3cIfDownTimes Number of times the interface went down, since the device was initialized. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.10 |
| hh3cIfPfcStatus Pfc (Priority-based Flow Control) status.
Forcibly enable Pfc by enable(1).
Disable Pfc by disable(2).
Set Pfc to auto mode by auto(3).
In auto mode, the local end automatic… | column | Enumeration | .1.3.6.1.4.1.25506.2.40.2.3.2.1.11 |
| hh3cIfPfcDot1pNoDrop Pfc (Priority-based Flow Control) dot1q list,
bit 0 through bit 7 corresponding to priority 0 through priority 7.
See hh3cIfPfcStatus. | column | Bits | .1.3.6.1.4.1.25506.2.40.2.3.2.1.12 |
| hh3cIfDescription This object is also an 'alias' name for the interface specified by a
network manager, like the object of ifAlias. However, the size of
this object is larger than ifAlias. When t… | column | OctetString | .1.3.6.1.4.1.25506.2.40.2.3.2.1.13 |
| hh3cIfFwdErrDiscards The number of packets that were discarded when being forwarded. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.14 |
| hh3cIfFiberOrCopper Type of the port,which can be copper or fiber. | column | Enumeration | .1.3.6.1.4.1.25506.2.40.2.3.2.1.15 |
| hh3cIfTransferMode Transfer mode of the port, which can be lan or wan. | column | Enumeration | .1.3.6.1.4.1.25506.2.40.2.3.2.1.16 |
| hh3cIfBandwidthRate The rate of the bandwidth for an interface. | column | Integer32 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.3 |
| hh3cIfDiscardPktRate The rate of the discarded packets for an interface. | column | Integer32 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.4 |
| hh3cIfStatusKeepTime The time since the interface
entered its current operational state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.25506.2.40.2.3.2.1.5 |
| hh3cIfInNUcastPkts The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.6 |
| hh3cIfOutNUcastPkts The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.25506.2.40.2.3.2.1.7 |
| hh3cIfIsPoe Whether the interface supports PoE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.40.2.3.2.1.8 |
| hh3cIfOperStatus Current status of the interface. In testing state,
no operational packets can be forwarded. If ifAdminStatus
is down, hh3cIfOperStatus should be admindown. If
ifAdminStatus is … | column | Enumeration | .1.3.6.1.4.1.25506.2.40.2.3.2.1.9 |