hh3cEponAutoAuthorize

HH3C-EPON-MIB · .1.3.6.1.4.1.25506.2.42.1.1.1
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
This value determines whether software performs
self-authorization for each Optical Network Unit(ONU)
registering to the network.  Setting it to false
means for every ONU registering, software requires
external authorization, and until it's done the
ONU is not authenticated.  True value means software
authorizes each ONU registering to the network
automatically.
true  - ONUs are always authorized.
false - If 802.1x authorization is enable,
the ONUs have to be authorized by
the protocol.
- If 802.1x authorization is disable,
ONUs are always authorized.

Context

MIB
HH3C-EPON-MIB
OID
.1.3.6.1.4.1.25506.2.42.1.1.1
Type
scalar
Access
readwrite
Status
current
Parent
hh3cEponSysMan
Siblings
23

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cEponMonitorCycleMaxVal
The upper limit of cycle which be confined to the hh3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.10
hh3cEponMsgTimeOutMinVal
The lower limit of timeout which be confined to the hh3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.11
hh3cEponMsgTimeOutMaxVal
The upper limit of timeout which be confined to the hh3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.12
hh3cEponMsgLoseNumMinVal
The lower limit of time which be confined to the hh3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.13
hh3cEponMsgLoseNumMaxVal
The upper limit of time which be confined to the hh3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.14
hh3cEponSysScalarGroupnode-.1.3.6.1.4.1.25506.2.42.1.1.15
hh3cEponSysManTable
This table defines system related parameters.
table-.1.3.6.1.4.1.25506.2.42.1.1.16
hh3cEponAutoUpdateTable
EPON auto update ONU application configuration.
table-.1.3.6.1.4.1.25506.2.42.1.1.17
hh3cEponOuiIndexNextTable
Next OUI index table.
table-.1.3.6.1.4.1.25506.2.42.1.1.18
hh3cEponOuiTable
List of OUI and OAM supported by OLT.
table-.1.3.6.1.4.1.25506.2.42.1.1.19
hh3cEponMonitorCycle
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. Th…
scalarInteger32.1.3.6.1.4.1.25506.2.42.1.1.2
hh3cEponMulticastControlTable
Multicast control global configuration.
table-.1.3.6.1.4.1.25506.2.42.1.1.20
hh3cEponAuthMode
Set global auth mode, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.
scalarBits.1.3.6.1.4.1.25506.2.42.1.1.21
hh3cEponOnuBindOneToOne
Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.22
hh3cEponOnuBlackListMacTable
The table contains the configurations for managing the ONU MAC blacklist.
table-.1.3.6.1.4.1.25506.2.42.1.1.23
hh3cEponOnuBlackListLoidTable
The table contains the configurations for managing the ONU LOID blacklist.
table-.1.3.6.1.4.1.25506.2.42.1.1.24
hh3cEponMsgTimeOut
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.3
hh3cEponMsgLoseNum
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.4
hh3cEponSysHasEPONBoard
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.5
hh3cEponMonitorCycleEnable
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.6
hh3cEponOltSoftwareErrAlmEnable
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.7
hh3cEponPortLoopBackAlmEnable
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.8
hh3cEponMonitorCycleMinVal
The lower limit of cycle which be confined to the hh3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.9