hh3cEponAuthMode

HH3C-EPON-MIB · .1.3.6.1.4.1.25506.2.42.1.1.21
MIB view Table view

Object

scalar r/w Bits 
Set global auth mode, which can be combined(loid and loid-password cannot be configured at the same time).
If no auth mode was set, 0 is returned.

Context

MIB
HH3C-EPON-MIB
OID
.1.3.6.1.4.1.25506.2.42.1.1.21
Type
scalar
Access
readwrite
Status
current
Parent
hh3cEponSysMan
Siblings
23

Syntax

Bits

Values & Constraints

Enumerated Values
0mac
1loid
2loidPassword

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cEponAutoAuthorize
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU register…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.1
hh3cEponMonitorCycleMaxVal
The upper limit of cycle which be confined to the hh3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.10
hh3cEponMsgTimeOutMinVal
The lower limit of timeout which be confined to the hh3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.11
hh3cEponMsgTimeOutMaxVal
The upper limit of timeout which be confined to the hh3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.12
hh3cEponMsgLoseNumMinVal
The lower limit of time which be confined to the hh3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.13
hh3cEponMsgLoseNumMaxVal
The upper limit of time which be confined to the hh3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.14
hh3cEponSysScalarGroupnode-.1.3.6.1.4.1.25506.2.42.1.1.15
hh3cEponSysManTable
This table defines system related parameters.
table-.1.3.6.1.4.1.25506.2.42.1.1.16
hh3cEponAutoUpdateTable
EPON auto update ONU application configuration.
table-.1.3.6.1.4.1.25506.2.42.1.1.17
hh3cEponOuiIndexNextTable
Next OUI index table.
table-.1.3.6.1.4.1.25506.2.42.1.1.18
hh3cEponOuiTable
List of OUI and OAM supported by OLT.
table-.1.3.6.1.4.1.25506.2.42.1.1.19
hh3cEponMonitorCycle
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. Th…
scalarInteger32.1.3.6.1.4.1.25506.2.42.1.1.2
hh3cEponMulticastControlTable
Multicast control global configuration.
table-.1.3.6.1.4.1.25506.2.42.1.1.20
hh3cEponOnuBindOneToOne
Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.22
hh3cEponOnuBlackListMacTable
The table contains the configurations for managing the ONU MAC blacklist.
table-.1.3.6.1.4.1.25506.2.42.1.1.23
hh3cEponOnuBlackListLoidTable
The table contains the configurations for managing the ONU LOID blacklist.
table-.1.3.6.1.4.1.25506.2.42.1.1.24
hh3cEponMsgTimeOut
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.3
hh3cEponMsgLoseNum
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.4
hh3cEponSysHasEPONBoard
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.5
hh3cEponMonitorCycleEnable
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.6
hh3cEponOltSoftwareErrAlmEnable
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.7
hh3cEponPortLoopBackAlmEnable
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.42.1.1.8
hh3cEponMonitorCycleMinVal
The lower limit of cycle which be confined to the hh3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.42.1.1.9