hh3cBfdSessAppSupportId

HH3C-BFD-STD-MIB · .1.3.6.1.4.1.25506.2.72.1.3.1.3

MIB view Table view

Object

column Bits

This variable contains an ID used to indicate
a local application which owns or maintains this
BFD session. Note, a BFD session can support several route
protocols. This is a bit-map of possible conditions.
The corresponding bit positions are:
|0        |none        |
|1        |ospf        |
|2        |isis        |
|3        |bgp         |
|4        |mpls        |

Context

MIB: HH3C-BFD-STD-MIB
OID: .1.3.6.1.4.1.25506.2.72.1.3.1.3
Type: column
Access: readonly
Status: current
Parent: hh3cBfdSessEntry
Table: hh3cBfdSessTable
Siblings: 14

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	none
`1`	ospf
`2`	isis
`3`	bgp
`4`	mpls

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hh3cBfdSessIndex This variable contains an index which represents a unique BFD session on this device.	column	BfdSessIndexTC	`.1.3.6.1.4.1.25506.2.72.1.3.1.1`
hh3cBfdSessRemoteAddr This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.25506.2.72.1.3.1.10`
hh3cBfdSessLocalDiag The BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value.	column	BfdDiag	`.1.3.6.1.4.1.25506.2.72.1.3.1.11`
hh3cBfdSessState The state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one for tea…	column	Enumeration	`.1.3.6.1.4.1.25506.2.72.1.3.1.12`
hh3cBfdSessControlPlanIndepFlag This variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local system is independent…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.72.1.3.1.13`
hh3cBfdSessAuthFlag This variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(2…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.72.1.3.1.14`
hh3cBfdSessDemandModeFlag This variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(2) if not	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.72.1.3.1.15`
hh3cBfdSessIfIndex This variable contains an interface's index under which the BFD session runs. If hh3cBfdSessIfIndex is equal to 0, it means that the BFD session does not specify an interface.	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.25506.2.72.1.3.1.2`
hh3cBfdSessLocalDiscr This variable defines the local discriminator for this BFD session, used to uniquely identify it.	column	Unsigned32	`.1.3.6.1.4.1.25506.2.72.1.3.1.4`
hh3cBfdSessRemoteDiscr This variable defines the session discriminator chosen by the remote system for this BFD session.	column	Unsigned32	`.1.3.6.1.4.1.25506.2.72.1.3.1.5`
hh3cBfdSessDstPort The UDP Port for BFD. The default value is the well-known value for this port.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.25506.2.72.1.3.1.6`
hh3cBfdSessOperMode This variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In this …	column	Enumeration	`.1.3.6.1.4.1.25506.2.72.1.3.1.7`
hh3cBfdSessAddrType This object defines IP address type of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. …	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.25506.2.72.1.3.1.8`
hh3cBfdSessLocalAddr This variable defines IP address of the local interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to …	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.25506.2.72.1.3.1.9`